Streams Quickstart Guide

Dependency

The Akka dependencies are available from Akka’s library repository. To access them there, you need to configure the URL for this repository.

sbt
resolvers += "Akka library repository".at("https://repo.akka.io/maven")
Maven
<project>
  ...
  <repositories>
    <repository>
      <id>akka-repository</id>
      <name>Akka library repository</name>
      <url>https://repo.akka.io/maven</url>
    </repository>
  </repositories>
</project>
Gradle
repositories {
    mavenCentral()
    maven {
        url "https://repo.akka.io/maven"
    }
}

To use Akka Streams, add the module to your project:

sbt
val AkkaVersion = "2.10.0+14-bc29c0c3-SNAPSHOT"
libraryDependencies += "com.typesafe.akka" %% "akka-stream" % AkkaVersion
Maven
<properties>
  <scala.binary.version>2.13</scala.binary.version>
</properties>
<dependencyManagement>
  <dependencies>
    <dependency>
      <groupId>com.typesafe.akka</groupId>
      <artifactId>akka-bom_${scala.binary.version}</artifactId>
      <version>2.10.0+14-bc29c0c3-SNAPSHOT</version>
      <type>pom</type>
      <scope>import</scope>
    </dependency>
  </dependencies>
</dependencyManagement>
<dependencies>
  <dependency>
    <groupId>com.typesafe.akka</groupId>
    <artifactId>akka-stream_${scala.binary.version}</artifactId>
  </dependency>
</dependencies>
Gradle
def versions = [
  ScalaBinary: "2.13"
]
dependencies {
  implementation platform("com.typesafe.akka:akka-bom_${versions.ScalaBinary}:2.10.0+14-bc29c0c3-SNAPSHOT")

  implementation "com.typesafe.akka:akka-stream_${versions.ScalaBinary}"
}
Note

Both the Java and Scala DSLs of Akka Streams are bundled in the same JAR. For a smooth development experience, when using an IDE such as Eclipse or IntelliJ, you can disable the auto-importer from suggesting javadsl imports when working in Scala, or viceversa. See IDE Tips.

First steps

A stream usually begins at a source, so this is also how we start an Akka Stream. Before we create one, we import the full complement of streaming tools:

Scala
sourceimport akka.stream._
import akka.stream.scaladsl._

import scala.annotation.nowarn
Java
sourceimport akka.stream.*;
import akka.stream.javadsl.*;

If you want to execute the code samples while you read through the quick start guide, you will also need the following imports:

Scala
sourceimport akka.{ Done, NotUsed }
import akka.actor.ActorSystem
import akka.util.ByteString
import scala.concurrent._
import scala.concurrent.duration._
import java.nio.file.Paths
Java
sourceimport akka.Done;
import akka.NotUsed;
import akka.actor.ActorSystem;
import akka.util.ByteString;

import java.nio.file.Paths;
import java.math.BigInteger;
import java.time.Duration;
import java.util.concurrent.CompletionStage;
import java.util.concurrent.ExecutionException;

And an objecta class to start an Akka ActorSystemActorSystem and hold your code . Making the ActorSystem implicit makes it available to the streams without manually passing it when running them:

Scala
sourceobject Main extends App {
  implicit val system: ActorSystem = ActorSystem("QuickStart")
  // Code here
}
Java
sourcepublic class Main {
  public static void main(String[] argv) {
    final ActorSystem system = ActorSystem.create("QuickStart");
    // Code here
  }
}

Now we will start with a rather simple source, emitting the integers 1 to 100:

Scala
sourceval source: Source[Int, NotUsed] = Source(1 to 100)
Java
sourcefinal Source<Integer, NotUsed> source = Source.range(1, 100);

The SourceSource type is parameterized with two types: the first one is the type of element that this source emits and the second one, the “materialized value”, allows running the source to produce some auxiliary value (e.g. a network source may provide information about the bound port or the peer’s address). Where no auxiliary information is produced, the type NotUsedNotUsed is used. A simple range of integers falls into this category - running our stream produces a NotUsed.

Having created this source means that we have a description of how to emit the first 100 natural numbers, but this source is not yet active. In order to get those numbers out we have to run it:

Scala
sourcesource.runForeach(i => println(i))
Java
sourcesource.runForeach(i -> System.out.println(i), system);

This line will complement the source with a consumer function—in this example we print out the numbers to the console—and pass this little stream setup to an Actor that runs it. This activation is signaled by having “run” be part of the method name; there are other methods that run Akka Streams, and they all follow this pattern.

When running this source in a scala.Appprogram you might notice it does not terminate, because the ActorSystemActorSystem is never terminated. Luckily runForeachrunForeach returns a Future[DoneDone]CompletionStage<DoneDone> which resolves when the stream finishes:

Scala
sourceval done: Future[Done] = source.runForeach(i => println(i))

implicit val ec = system.dispatcher
done.onComplete(_ => system.terminate())
Java
sourcefinal CompletionStage<Done> done = source.runForeach(i -> System.out.println(i), system);

done.thenRun(() -> system.terminate());

The nice thing about Akka Streams is that the Source is a description of what you want to run, and like an architect’s blueprint it can be reused, incorporated into a larger design. We may choose to transform the source of integers and write it to a file instead:

Scala
sourceval factorials = source.scan(BigInt(1))((acc, next) => acc * next)

val result: Future[IOResult] =
  factorials.map(num => ByteString(s"$num\n")).runWith(FileIO.toPath(Paths.get("factorials.txt")))
Java
sourcefinal Source<BigInteger, NotUsed> factorials =
    source.scan(BigInteger.ONE, (acc, next) -> acc.multiply(BigInteger.valueOf(next)));

final CompletionStage<IOResult> result =
    factorials
        .map(num -> ByteString.fromString(num.toString() + "\n"))
        .runWith(FileIO.toPath(Paths.get("factorials.txt")), system);

First we use the scanscan operator to run a computation over the whole stream: starting with the number 1 (BigInt(1)BigInteger.ONE) we multiply by each of the incoming numbers, one after the other; the scan operation emits the initial value and then every calculation result. This yields the series of factorial numbers which we stash away as a Source for later reuse—it is important to keep in mind that nothing is actually computed yet, this is a description of what we want to have computed once we run the stream. Then we convert the resulting series of numbers into a stream of ByteStringByteString objects describing lines in a text file. This stream is then run by attaching a file as the receiver of the data. In the terminology of Akka Streams this is called a SinkSink. IOResultIOResult is a type that IO operations return in Akka Streams in order to tell you how many bytes or elements were consumed and whether the stream terminated normally or exceptionally.

Reusable Pieces

One of the nice parts of Akka Streams—and something that other stream libraries do not offer—is that not only sources can be reused like blueprints, all other elements can be as well. We can take the file-writing SinkSink, prepend the processing steps necessary to get the ByteStringByteString elements from incoming strings and package that up as a reusable piece as well. Since the language for writing these streams always flows from left to right (just like plain English), we need a starting point that is like a source but with an “open” input. In Akka Streams this is called a FlowFlow:

Scala
sourcedef lineSink(filename: String): Sink[String, Future[IOResult]] =
  Flow[String].map(s => ByteString(s + "\n")).toMat(FileIO.toPath(Paths.get(filename)))(Keep.right)
Java
sourcepublic Sink<String, CompletionStage<IOResult>> lineSink(String filename) {
  return Flow.of(String.class)
      .map(s -> ByteString.fromString(s.toString() + "\n"))
      .toMat(FileIO.toPath(Paths.get(filename)), Keep.right());
}

Starting from a flow of strings we convert each to ByteString and then feed to the already known file-writing Sink. The resulting blueprint is a Sink[String, Future[IOResult]]Sink<String, CompletionStage<IOResult>>, which means that it accepts strings as its input and when materialized it will create auxiliary information of type Future[IOResultIOResult]CompletionStage<IOResultIOResult> (when chaining operations on a Source or Flow the type of the auxiliary information—called the “materialized value”—is given by the leftmost starting point; since we want to retain what the FileIO.toPathFileIO.toPath sink has to offer, we need to say Keep.rightKeep.right().

We can use the new and shiny SinkSink we just created by attaching it to our factorials source—after a small adaptation to turn the numbers into strings:

Scala
sourcefactorials.map(_.toString).runWith(lineSink("factorial2.txt"))
Java
sourcefactorials.map(BigInteger::toString).runWith(lineSink("factorial2.txt"), system);

Time-Based Processing

Before we start looking at a more involved example we explore the streaming nature of what Akka Streams can do. Starting from the factorials source we transform the stream by zipping it together with another stream, represented by a SourceSource that emits the number 0 to 100: the first number emitted by the factorials source is the factorial of zero, the second is the factorial of one, and so on. We combine these two by forming strings like "3! = 6".

Scala
sourcefactorials
  .zipWith(Source(0 to 100))((num, idx) => s"$idx! = $num")
  .throttle(1, 1.second)
  .runForeach(println)
Java
sourcefactorials
    .zipWith(Source.range(0, 99), (num, idx) -> String.format("%d! = %s", idx, num))
    .throttle(1, Duration.ofSeconds(1))
    .runForeach(s -> System.out.println(s), system);

All operations so far have been time-independent and could have been performed in the same fashion on strict collections of elements. The next line demonstrates that we are in fact dealing with streams that can flow at a certain speed: we use the throttlethrottle operator to slow down the stream to 1 element per second.

If you run this program you will see one line printed per second. One aspect that is not immediately visible deserves mention, though: if you try and set the streams to produce a billion numbers each then you will notice that your JVM does not crash with an OutOfMemoryError, even though you will also notice that running the streams happens in the background, asynchronously (this is the reason for the auxiliary information to be provided as a FutureCompletionStage, in the future). The secret that makes this work is that Akka Streams implicitly implement pervasive flow control, all operators respect back-pressure. This allows the throttle operator to signal to all its upstream sources of data that it can only accept elements at a certain rate—when the incoming rate is higher than one per second the throttle operator will assert back-pressure upstream.

This is all there is to Akka Streams in a nutshell—glossing over the fact that there are dozens of sources and sinks and many more stream transformation operators to choose from, see also operator index.

Reactive Tweets

A typical use case for stream processing is consuming a live stream of data that we want to extract or aggregate some other data from. In this example we’ll consider consuming a stream of tweets and extracting information concerning Akka from them.

We will also consider the problem inherent to all non-blocking streaming solutions: “What if the subscriber is too slow to consume the live stream of data?”. Traditionally the solution is often to buffer the elements, but this can—and usually will—cause eventual buffer overflows and instability of such systems. Instead Akka Streams depend on internal backpressure signals that allow to control what should happen in such scenarios.

Here’s the data model we’ll be working with throughout the quickstart examples:

Scala
sourcefinal case class Author(handle: String)

final case class Hashtag(name: String)

final case class Tweet(author: Author, timestamp: Long, body: String) {
  def hashtags: Set[Hashtag] =
    body
      .split(" ")
      .collect {
        case t if t.startsWith("#") => Hashtag(t.replaceAll("[^#\\w]", ""))
      }
      .toSet
}

val akkaTag = Hashtag("#akka")
Java
sourcepublic static class Author {
  public final String handle;

  public Author(String handle) {
    this.handle = handle;
  }

  // ...

}

public static class Hashtag {
  public final String name;

  public Hashtag(String name) {
    this.name = name;
  }

  // ...
}

public static class Tweet {
  public final Author author;
  public final long timestamp;
  public final String body;

  public Tweet(Author author, long timestamp, String body) {
    this.author = author;
    this.timestamp = timestamp;
    this.body = body;
  }

  public Set<Hashtag> hashtags() {
    return Arrays.asList(body.split(" ")).stream()
        .filter(a -> a.startsWith("#"))
        .map(a -> new Hashtag(a))
        .collect(Collectors.toSet());
  }

  // ...
}

public static final Hashtag AKKA = new Hashtag("#akka");
Note

If you would like to get an overview of the used vocabulary first instead of diving head-first into an actual example you can have a look at the Core concepts and Defining and running streams sections of the docs, and then come back to this quickstart to see it all pieced together into a simple example application.

Transforming and consuming simple streams

The example application we will be looking at is a simple Twitter feed stream from which we’ll want to extract certain information, like for example finding all twitter handles of users who tweet about #akka.

In order to prepare our environment by creating an ActorSystemActorSystem which will be responsible for running the streams we are about to create:

Scala
sourceimplicit val system: ActorSystem = ActorSystem("reactive-tweets")
Java
sourcefinal ActorSystem system = ActorSystem.create("reactive-tweets");

Let’s assume we have a stream of tweets readily available. In Akka this is expressed as a Source[Out, M]Source<Out, M>:

Scala
sourceval tweets: Source[Tweet, NotUsed]
Java
sourceSource<Tweet, NotUsed> tweets;

Streams always start flowing from a Source[Out,M1]Source<Out,M1> then can continue through Flow[In,Out,M2]Flow<In,Out,M2> elements or more advanced operators to finally be consumed by a Sink[In,M3]Sink<In,M3> (ignore the type parameters M1, M2 and M3 for now, they are not relevant to the types of the elements produced/consumed by these classes – they are “materialized types”, which we’ll talk about below). The first type parameter—Tweet in this case—designates the kind of elements produced by the source while the M type parameters describe the object that is created during materialization (see below)—NotUsed (from the scala.runtime package) means that no value is produced, it is the generic equivalent of void.

The operations should look familiar to anyone who has used the Scala Collections library, however they operate on streams and not collections of data (which is a very important distinction, as some operations only make sense in streaming and vice versa):

Scala
sourceval authors: Source[Author, NotUsed] =
  tweets.filter(_.hashtags.contains(akkaTag)).map(_.author)
Java
sourcefinal Source<Author, NotUsed> authors =
    tweets.filter(t -> t.hashtags().contains(AKKA)).map(t -> t.author);

Finally in order to materialize and run the stream computation we need to attach the Flow to a SinkSink<T, M> that will get the Flow running. The simplest way to do this is to call runWith(sink)runWith(sink) on a SourceSource<Out, M>. For convenience a number of common Sinks are predefined and collected as static methods on the Sink companion objectSink class. For now let’s print each author:

Scala
sourceauthors.runWith(Sink.foreach(println))
Java
sourceauthors.runWith(Sink.foreach(a -> System.out.println(a)), system);

or by using the shorthand version (which are defined only for the most popular Sinks such as Sink.foldSink.fold and Sink.foreachSink.foreach):

Scala
sourceauthors.runForeach(println)
Java
sourceauthors.runForeach(a -> System.out.println(a), system);

Materializing and running a stream always requires an ActorSystem to be in implicit scope (or passed in explicitly, like this: .runWith(sink)(system))passed in explicitly, like this: runWith(sink, system).

The complete snippet looks like this:

Scala
sourceimplicit val system: ActorSystem = ActorSystem("reactive-tweets")

val authors: Source[Author, NotUsed] =
  tweets.filter(_.hashtags.contains(akkaTag)).map(_.author)

authors.runWith(Sink.foreach(println))
Java
sourcefinal ActorSystem system = ActorSystem.create("reactive-tweets");

final Source<Author, NotUsed> authors =
    tweets.filter(t -> t.hashtags().contains(AKKA)).map(t -> t.author);

authors.runWith(Sink.foreach(a -> System.out.println(a)), system);

Flattening sequences in streams

In the previous section we were working on 1:1 relationships of elements which is the most common case, but sometimes we might want to map from one element to a number of elements and receive a “flattened” stream, similarly like flatMap works on Scala Collections. In order to get a flattened stream of hashtags from our stream of tweets we can use the mapConcatmapConcat operator:

Scala
sourceval hashtags: Source[Hashtag, NotUsed] = tweets.mapConcat(_.hashtags.toList)
Java
sourcefinal Source<Hashtag, NotUsed> hashtags =
    tweets.mapConcat(t -> new ArrayList<Hashtag>(t.hashtags()));
Note

The name flatMap was consciously avoided due to its proximity with for-comprehensions and monadic composition. It is problematic for two reasons: firstfirstly, flattening by concatenation is often undesirable in bounded stream processing due to the risk of deadlock (with merge being the preferred strategy), and secondsecondly, the monad laws would not hold for our implementation of flatMap (due to the liveness issues).

Please note that the mapConcatmapConcat requires the supplied function to return an iterable (f: Out => immutable.Iterable[T]a strict collection (Out f -> java.util.List<T>), whereas flatMap would have to operate on streams all the way through.

Broadcasting a stream

Now let’s say we want to persist all hashtags, as well as all author names from this one live stream. For example we’d like to write all author handles into one file, and all hashtags into another file on disk. This means we have to split the source stream into two streams which will handle the writing to these different files.

Elements that can be used to form such “fan-out” (or “fan-in”) structures are referred to as “junctions” in Akka Streams. One of these that we’ll be using in this example is called BroadcastBroadcast, and it emits elements from its input port to all of its output ports.

Akka Streams intentionally separate the linear stream structures (Flows) from the non-linear, branching ones (Graphs) in order to offer the most convenient API for both of these cases. Graphs can express arbitrarily complex stream setups at the expense of not reading as familiarly as collection transformations.

Graphs are constructed using GraphDSLGraphDSL like this:

Scala
sourceval writeAuthors: Sink[Author, NotUsed] = ???
val writeHashtags: Sink[Hashtag, NotUsed] = ???
val g = RunnableGraph.fromGraph(GraphDSL.create() { implicit b =>
  import GraphDSL.Implicits._

  val bcast = b.add(Broadcast[Tweet](2))
  tweets ~> bcast.in
  bcast.out(0) ~> Flow[Tweet].map(_.author) ~> writeAuthors
  bcast.out(1) ~> Flow[Tweet].mapConcat(_.hashtags.toList) ~> writeHashtags
  ClosedShape
})
g.run()
Java
sourceSink<Author, NotUsed> writeAuthors;
Sink<Hashtag, NotUsed> writeHashtags;
RunnableGraph.fromGraph(
        GraphDSL.create(
            b -> {
              final UniformFanOutShape<Tweet, Tweet> bcast = b.add(Broadcast.create(2));
              final FlowShape<Tweet, Author> toAuthor =
                  b.add(Flow.of(Tweet.class).map(t -> t.author));
              final FlowShape<Tweet, Hashtag> toTags =
                  b.add(
                      Flow.of(Tweet.class)
                          .mapConcat(t -> new ArrayList<Hashtag>(t.hashtags())));
              final SinkShape<Author> authors = b.add(writeAuthors);
              final SinkShape<Hashtag> hashtags = b.add(writeHashtags);

              b.from(b.add(tweets)).viaFanOut(bcast).via(toAuthor).to(authors);
              b.from(bcast).via(toTags).to(hashtags);
              return ClosedShape.getInstance();
            }))
    .run(system);

As you can see, inside the GraphDSL we use an implicit graph builder b to mutably construct the graph using the ~> “edge operator” (also read as “connect” or “via” or “to”). The operator is provided implicitly by importing GraphDSL.Implicits._we use graph builder b to construct the graph using UniformFanOutShapeUniformFanOutShape and FlowFlow s.

GraphDSL.createGraphDSL.create returns a GraphGraph, in this example a Graph[ClosedShape, NotUsed]Graph<ClosedShape,NotUsed> where ClosedShapeClosedShape means that it is a fully connected graph or “closed” - there are no unconnected inputs or outputs. Since it is closed it is possible to transform the graph into a RunnableGraphRunnableGraph using RunnableGraph.fromGraphRunnableGraph.fromGraph. The RunnableGraph can then be run()run() to materialize a stream out of it.

Both Graph and RunnableGraph are immutable, thread-safe, and freely shareable.

A graph can also have one of several other shapes, with one or more unconnected ports. Having unconnected ports expresses a graph that is a partial graph. Concepts around composing and nesting graphs in large structures are explained in detail in Modularity, Composition and Hierarchy. It is also possible to wrap complex computation graphs as Flows, Sinks or Sources, which will be explained in detail in Constructing Sources, Sinks and Flows from Partial GraphsConstructing and combining Partial Graphs.

Back-pressure in action

One of the main advantages of Akka Streams is that they always propagate back-pressure information from stream Sinks (Subscribers) to their Sources (Publishers). It is not an optional feature, and is enabled at all times. To learn more about the back-pressure protocol used by Akka Streams and all other Reactive Streams compatible implementations read Back-pressure explained.

A typical problem applications (not using Akka Streams) like this often face is that they are unable to process the incoming data fast enough, either temporarily or by design, and will start buffering incoming data until there’s no more space to buffer, resulting in either OutOfMemoryError s or other severe degradations of service responsiveness. With Akka Streams buffering can and must be handled explicitly. For example, if we are only interested in the “most recent tweets, with a buffer of 10 elements” this can be expressed using the bufferbuffer element:

Scala
sourcetweets.buffer(10, OverflowStrategy.dropHead).map(slowComputation).runWith(Sink.ignore)
Java
sourcetweets
    .buffer(10, OverflowStrategy.dropHead())
    .map(t -> slowComputation(t))
    .runWith(Sink.ignore(), system);

The buffer element takes an explicit and required OverflowStrategyOverflowStrategy, which defines how the buffer should react when it receives another element while it is full. Strategies provided include dropping the oldest element (dropHead), dropping the entire buffer, signalling errorsfailures etc. Be sure to pick and choose the strategy that fits your use case best.

Materialized values

So far we’ve been only processing data using Flows and consuming it into some kind of external Sink - be it by printing values or storing them in some external system. However sometimes we may be interested in some value that can be obtained from the materialized processing pipeline. For example, we want to know how many tweets we have processed. While this question is not as obvious to give an answer to in case of an infinite stream of tweets (one way to answer this question in a streaming setting would be to create a stream of counts described as “up until now, we’ve processed N tweets”), but in general it is possible to deal with finite streams and come up with a nice result such as a total count of elements.

First, let’s write such an element counter using Sink.fold andFlow.of(Class) and Sink.fold to see how the types look like:

Scala
sourceval count: Flow[Tweet, Int, NotUsed] = Flow[Tweet].map(_ => 1)

val sumSink: Sink[Int, Future[Int]] = Sink.fold[Int, Int](0)(_ + _)

val counterGraph: RunnableGraph[Future[Int]] =
  tweets.via(count).toMat(sumSink)(Keep.right)

val sum: Future[Int] = counterGraph.run()

sum.foreach(c => println(s"Total tweets processed: $c"))
Java
sourcefinal Sink<Integer, CompletionStage<Integer>> sumSink =
    Sink.<Integer, Integer>fold(0, (acc, elem) -> acc + elem);

final RunnableGraph<CompletionStage<Integer>> counter =
    tweets.map(t -> 1).toMat(sumSink, Keep.right());

final CompletionStage<Integer> sum = counter.run(system);

sum.thenAcceptAsync(
    c -> System.out.println("Total tweets processed: " + c), system.dispatcher());

First we prepare a reusable Flow that will change each incoming tweet into an integer of value 1. We’ll use this in order to combine those with a Sink.fold that will sum all Int elements of the stream and make its result available as a Future[Int]. Next we connect the tweets stream to count with via. Finally we connect the Flow to the previously prepared Sink using toMatSink.fold will sum all Integer elements of the stream and make its result available as a CompletionStage<Integer>. Next we use the map method of tweets Source which will change each incoming tweet into an integer value 1. Finally we connect the Flow to the previously prepared Sink using toMat.

Remember those mysterious Mat type parameters on Source[+Out, +Mat], Flow[-In, +Out, +Mat] and Sink[-In, +Mat]Source<Out, Mat>, Flow<In, Out, Mat> and Sink<In, Mat>? They represent the type of values these processing parts return when materialized. When you chain these together, you can explicitly combine their materialized values. In our example we used the Keep.rightKeep.right() predefined function, which tells the implementation to only care about the materialized type of the operator currently appended to the right. The materialized type of sumSink is Future[Int]CompletionStage and because of using Keep.rightKeep.right(), the resulting RunnableGraphRunnableGraph has also a type parameter of Future[Int]CompletionStage<Integer>.

This step does not yet materialize the processing pipeline, it merely prepares the description of the Flow, which is now connected to a Sink, and therefore can be run(), as indicated by its type: RunnableGraph[Future[Int]]RunnableGraph<CompletionStage<Integer>>. Next we call run()run() which materializes and runs the Flow. The value returned by calling run() on a RunnableGraph[T]RunnableGraph<T> is of type T. In our case this type is Future[Int]CompletionStage<Integer> which, when completed, will contain the total length of our tweets stream. In case of the stream failing, this future would complete with a Failure.

A RunnableGraphRunnableGraph may be reused and materialized multiple times, because it is only the “blueprint” of the stream. This means that if we materialize a stream, for example one that consumes a live stream of tweets within a minute, the materialized values for those two materializations will be different, as illustrated by this example:

Scala
sourceval sumSink = Sink.fold[Int, Int](0)(_ + _)
val counterRunnableGraph: RunnableGraph[Future[Int]] =
  tweetsInMinuteFromNow.filter(_.hashtags contains akkaTag).map(t => 1).toMat(sumSink)(Keep.right)

// materialize the stream once in the morning
val morningTweetsCount: Future[Int] = counterRunnableGraph.run()
// and once in the evening, reusing the flow
val eveningTweetsCount: Future[Int] = counterRunnableGraph.run()
Java
sourcefinal Sink<Integer, CompletionStage<Integer>> sumSink =
    Sink.<Integer, Integer>fold(0, (acc, elem) -> acc + elem);
final RunnableGraph<CompletionStage<Integer>> counterRunnableGraph =
    tweetsInMinuteFromNow
        .filter(t -> t.hashtags().contains(AKKA))
        .map(t -> 1)
        .toMat(sumSink, Keep.right());

// materialize the stream once in the morning
final CompletionStage<Integer> morningTweetsCount = counterRunnableGraph.run(system);
// and once in the evening, reusing the blueprint
final CompletionStage<Integer> eveningTweetsCount = counterRunnableGraph.run(system);

Many elements in Akka Streams provide materialized values which can be used for obtaining either results of computation or steering these elements which will be discussed in detail in Stream Materialization. Summing up this section, now we know what happens behind the scenes when we run this one-liner, which is equivalent to the multi line version above:

Scala
sourceval sum: Future[Int] = tweets.map(t => 1).runWith(sumSink)
Java
sourcefinal CompletionStage<Integer> sum = tweets.map(t -> 1).runWith(sumSink, system);
Note

runWith() is a convenience method that automatically ignores the materialized value of any other operators except those appended by the runWith() itself. In the above example it translates to using Keep.rightKeep.right() as the combiner for materialized values.

Found an error in this documentation? The source code for this page can be found here. Please feel free to edit and contribute a pull request.