o

akka.stream.javadsl

RestartFlow

object RestartFlow

A RestartFlow wraps a Flow that gets restarted when it completes or fails.

They are useful for graphs that need to run for longer than the Flow can necessarily guarantee it will, for example, for Flow streams that depend on a remote server that may crash or become partitioned. The RestartFlow ensures that the graph can continue running while the Flow restarts.

Source
RestartFlow.scala
Linear Supertypes
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. RestartFlow
  2. AnyRef
  3. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. Protected

Value Members

  1. final def !=(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  2. final def ##: Int
    Definition Classes
    AnyRef → Any
  3. final def ==(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  4. final def asInstanceOf[T0]: T0
    Definition Classes
    Any
  5. def clone(): AnyRef
    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.CloneNotSupportedException]) @HotSpotIntrinsicCandidate() @native()
  6. final def eq(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  7. def equals(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef → Any
  8. final def getClass(): Class[_ <: AnyRef]
    Definition Classes
    AnyRef → Any
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  9. def hashCode(): Int
    Definition Classes
    AnyRef → Any
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  10. final def isInstanceOf[T0]: Boolean
    Definition Classes
    Any
  11. final def ne(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  12. final def notify(): Unit
    Definition Classes
    AnyRef
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  13. final def notifyAll(): Unit
    Definition Classes
    AnyRef
    Annotations
    @HotSpotIntrinsicCandidate() @native()
  14. def onFailuresWithBackoff[In, Out](settings: RestartSettings, flowFactory: Creator[Flow[In, Out, _]]): Flow[In, Out, NotUsed]

    Wrap the given Flow with a Flow that will restart only when it fails that restarts using an exponential backoff.

    Wrap the given Flow with a Flow that will restart only when it fails that restarts using an exponential backoff.

    This new Flow will not emit failures. Any failure by the original Flow (the wrapped one) before that time will be handled by restarting it as long as maxRestarts is not reached. However, any termination signals, completion or cancellation sent to this Flow will terminate the wrapped Flow, if it's running, and then the Flow will be allowed to terminate without being restarted.

    The restart process is inherently lossy, since there is no coordination between cancelling and the sending of messages. A termination signal from either end of the wrapped Flow will cause the other end to be terminated, and any in transit messages will be lost. During backoff, this Flow will backpressure.

    This uses the same exponential backoff algorithm as akka.pattern.BackoffOpts.

    settings

    RestartSettings defining restart configuration

    flowFactory

    A factory for producing the Flow to wrap.

  15. final def synchronized[T0](arg0: => T0): T0
    Definition Classes
    AnyRef
  16. def toString(): String
    Definition Classes
    AnyRef → Any
  17. final def wait(arg0: Long, arg1: Int): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])
  18. final def wait(arg0: Long): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException]) @native()
  19. final def wait(): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])
  20. def withBackoff[In, Out](settings: RestartSettings, flowFactory: Creator[Flow[In, Out, _]]): Flow[In, Out, NotUsed]

    Wrap the given Flow with a Flow that will restart it when it fails or complete using an exponential backoff.

    Wrap the given Flow with a Flow that will restart it when it fails or complete using an exponential backoff.

    This Flow will not cancel, complete or emit a failure, until the opposite end of it has been cancelled or completed. Any termination by the Flow before that time will be handled by restarting it as long as maxRestarts is not reached. Any termination signals sent to this Flow however will terminate the wrapped Flow, if it's running, and then the Flow will be allowed to terminate without being restarted.

    The restart process is inherently lossy, since there is no coordination between cancelling and the sending of messages. A termination signal from either end of the wrapped Flow will cause the other end to be terminated, and any in transit messages will be lost. During backoff, this Flow will backpressure.

    This uses the same exponential backoff algorithm as akka.pattern.BackoffOpts.

    settings

    RestartSettings defining restart configuration

    flowFactory

    A factory for producing the Flow to wrap.

Deprecated Value Members

  1. def finalize(): Unit
    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.Throwable]) @Deprecated
    Deprecated

    (Since version 9)

  2. def onFailuresWithBackoff[In, Out](minBackoff: Duration, maxBackoff: Duration, randomFactor: Double, maxRestarts: Int, flowFactory: Creator[Flow[In, Out, _]]): Flow[In, Out, NotUsed]

    Wrap the given Flow with a Flow that will restart only when it fails that restarts using an exponential backoff.

    Wrap the given Flow with a Flow that will restart only when it fails that restarts using an exponential backoff.

    This new Flow will not emit failures. Any failure by the original Flow (the wrapped one) before that time will be handled by restarting it as long as maxRestarts is not reached. However, any termination signals, completion or cancellation sent to this Flow will terminate the wrapped Flow, if it's running, and then the Flow will be allowed to terminate without being restarted.

    The restart process is inherently lossy, since there is no coordination between cancelling and the sending of messages. A termination signal from either end of the wrapped Flow will cause the other end to be terminated, and any in transit messages will be lost. During backoff, this Flow will backpressure.

    This uses the same exponential backoff algorithm as akka.pattern.BackoffOpts.

    minBackoff

    minimum (initial) duration until the child actor will started again, if it is terminated

    maxBackoff

    the exponential back-off is capped to this duration

    randomFactor

    after calculation of the exponential back-off an additional random delay based on this factor is added, e.g. 0.2 adds up to 20% delay. In order to skip this additional delay pass in 0.

    maxRestarts

    the amount of restarts is capped to this amount within a time frame of minBackoff. Passing 0 will cause no restarts and a negative number will not cap the amount of restarts.

    flowFactory

    A factory for producing the Flow to wrap.

    Annotations
    @Deprecated @deprecated
    Deprecated

    (Since version 2.6.10) Use the overloaded method which accepts akka.stream.RestartSettings instead.

  3. def withBackoff[In, Out](minBackoff: Duration, maxBackoff: Duration, randomFactor: Double, maxRestarts: Int, flowFactory: Creator[Flow[In, Out, _]]): Flow[In, Out, NotUsed]

    Wrap the given Flow with a Flow that will restart it when it fails or complete using an exponential backoff.

    Wrap the given Flow with a Flow that will restart it when it fails or complete using an exponential backoff.

    This Flow will not cancel, complete or emit a failure, until the opposite end of it has been cancelled or completed. Any termination by the Flow before that time will be handled by restarting it as long as maxRestarts is not reached. Any termination signals sent to this Flow however will terminate the wrapped Flow, if it's running, and then the Flow will be allowed to terminate without being restarted.

    The restart process is inherently lossy, since there is no coordination between cancelling and the sending of messages. A termination signal from either end of the wrapped Flow will cause the other end to be terminated, and any in transit messages will be lost. During backoff, this Flow will backpressure.

    This uses the same exponential backoff algorithm as akka.pattern.BackoffOpts.

    minBackoff

    minimum (initial) duration until the child actor will started again, if it is terminated

    maxBackoff

    the exponential back-off is capped to this duration

    randomFactor

    after calculation of the exponential back-off an additional random delay based on this factor is added, e.g. 0.2 adds up to 20% delay. In order to skip this additional delay pass in 0.

    maxRestarts

    the amount of restarts is capped to this amount within a time frame of minBackoff. Passing 0 will cause no restarts and a negative number will not cap the amount of restarts.

    flowFactory

    A factory for producing the Flow to wrap.

    Annotations
    @Deprecated @deprecated
    Deprecated

    (Since version 2.6.10) Use the overloaded method which accepts akka.stream.RestartSettings instead.

  4. def withBackoff[In, Out](minBackoff: Duration, maxBackoff: Duration, randomFactor: Double, flowFactory: Creator[Flow[In, Out, _]]): Flow[In, Out, NotUsed]

    Wrap the given Flow with a Flow that will restart it when it fails or complete using an exponential backoff.

    Wrap the given Flow with a Flow that will restart it when it fails or complete using an exponential backoff.

    This Flow will not cancel, complete or emit a failure, until the opposite end of it has been cancelled or completed. Any termination by the Flow before that time will be handled by restarting it. Any termination signals sent to this Flow however will terminate the wrapped Flow, if it's running, and then the Flow will be allowed to terminate without being restarted.

    The restart process is inherently lossy, since there is no coordination between cancelling and the sending of messages. A termination signal from either end of the wrapped Flow will cause the other end to be terminated, and any in transit messages will be lost. During backoff, this Flow will backpressure.

    This uses the same exponential backoff algorithm as akka.pattern.BackoffOpts.

    minBackoff

    minimum (initial) duration until the child actor will started again, if it is terminated

    maxBackoff

    the exponential back-off is capped to this duration

    randomFactor

    after calculation of the exponential back-off an additional random delay based on this factor is added, e.g. 0.2 adds up to 20% delay. In order to skip this additional delay pass in 0.

    flowFactory

    A factory for producing the Flow to wrap.

    Annotations
    @Deprecated @deprecated
    Deprecated

    (Since version 2.6.10) Use the overloaded method which accepts akka.stream.RestartSettings instead.

Inherited from AnyRef

Inherited from Any

Ungrouped