Classic Logging

For the new API see Logging.

Module info

The Akka dependencies are available from Akka’s library repository. To access them there, you need to configure the URL for this repository.

sbt

resolvers += "Akka library repository".at("https://repo.akka.io/maven")

Maven

<project>
  ...
  <repositories>
    <repository>
      <id>akka-repository</id>
      <name>Akka library repository</name>
      <url>https://repo.akka.io/maven</url>
    </repository>
  </repositories>
</project>

Gradle

repositories {
    mavenCentral()
    maven {
        url "https://repo.akka.io/maven"
    }
}

To use Logging, you must at least use the Akka actors dependency in your project, and will most likely want to configure logging via the SLF4J module (see below).

sbt

val AkkaVersion = "2.9.7"
libraryDependencies += "com.typesafe.akka" %% "akka-actor" % AkkaVersion

Maven

<properties>
  <scala.binary.version>2.13</scala.binary.version>
</properties>
<dependencyManagement>
  <dependencies>
    <dependency>
      <groupId>com.typesafe.akka</groupId>
      <artifactId>akka-bom_${scala.binary.version}</artifactId>
      <version>2.9.7</version>
      <type>pom</type>
      <scope>import</scope>
    </dependency>
  </dependencies>
</dependencyManagement>
<dependencies>
  <dependency>
    <groupId>com.typesafe.akka</groupId>
    <artifactId>akka-actor_${scala.binary.version}</artifactId>
  </dependency>
</dependencies>

Gradle

def versions = [
  ScalaBinary: "2.13"
]
dependencies {
  implementation platform("com.typesafe.akka:akka-bom_${versions.ScalaBinary}:2.9.7")

  implementation "com.typesafe.akka:akka-actor_${versions.ScalaBinary}"
}

Introduction

Logging in Akka is not tied to a specific logging backend. By default log messages are printed to STDOUT, but you can plug-in a SLF4J logger or your own logger. Logging is performed asynchronously to ensure that logging has minimal performance impact. Logging generally means IO and locks, which can slow down the operations of your code if it was performed synchronously.

How to Log

Create a LoggingAdapterLoggingAdapter and use the error, warning, info, or debug methods, as illustrated in this example:

Scala

copysourceimport akka.event.Logging

class MyActor extends Actor {
  val log = Logging(context.system, this)
  override def preStart() = {
    log.debug("Starting")
  }
  override def preRestart(reason: Throwable, message: Option[Any]): Unit = {
    log.error(reason, "Restarting due to [{}] when processing [{}]", reason.getMessage, message.getOrElse(""))
  }
  def receive = {
    case "test" => log.info("Received test")
    case x      => log.warning("Received unknown message: {}", x)
  }
}

Java

copysourceimport akka.actor.*;
import akka.event.Logging;
import akka.event.LoggingAdapter;

copysourceclass MyActor extends AbstractActor {
  LoggingAdapter log = Logging.getLogger(getContext().getSystem(), this);

  @Override
  public void preStart() {
    log.debug("Starting");
  }

  @Override
  public void preRestart(Throwable reason, Optional<Object> message) {
    log.error(
        reason,
        "Restarting due to [{}] when processing [{}]",
        reason.getMessage(),
        message.isPresent() ? message.get() : "");
  }

  @Override
  public Receive createReceive() {
    return receiveBuilder()
        .matchEquals("test", msg -> log.info("Received test"))
        .matchAny(msg -> log.warning("Received unknown message: {}", msg))
        .build();
  }
}

class MyActor extends Actor with akka.actor.ActorLogging {
  ...
}

The first parameter to Logging Logging.getLogger could also be any LoggingBusLoggingBus, specifically system.eventStream system.getEventStream(). In the demonstrated case, the actor system’s address is included in the akkaSource representation of the log source (see Logging Thread, Akka Source and Actor System in MDC), while in the second case this is not automatically done. The second parameter to Logging Logging.getLogger is the source of this logging channel. The source object is translated to a String according to the following rules:

• if it is an Actor or ActorRef, its path is used
• in case of a String it is used as is
• in case of a Class an approximation of its simpleName is used
• in all other cases a compile error occurs unless an implicit LogSource[T] is in scope for the type in question the simpleName of its class is used

The log message may contain argument placeholders {}, which will be substituted if the log level is enabled. Compared to constructing a full string for the log message this has the advantage of avoiding superfluous string concatenation and object allocations when the log level is disabled. Giving more arguments than placeholders results in a warning being appended to the log statement (i.e. on the same line with the same severity). You may pass an array as the only substitution argument to have its elements be treated individually:

Scala

copysourceval args = Array("The", "brown", "fox", "jumps", 42)
system.log.debug("five parameters: {}, {}, {}, {}, {}", args)

Java

copysourcefinal Object[] args = new Object[] {"The", "brown", "fox", "jumps", 42};
system.log().debug("five parameters: {}, {}, {}, {}, {}", args);

The Java Class of the log source is also included in the generated LogEventLogEvent. In case of a simple string this is replaced with a “marker” class DummyClassForStringSourcesDummyClassForStringSources in order to allow special treatment of this case, e.g. in the SLF4J event listener which will then use the string instead of the class’ name for looking up the logger instance to use.

Logging of Dead Letters

By default messages sent to dead letters are logged at INFO level. Existence of dead letters does not necessarily indicate a problem, but they are logged by default for the sake of caution. After a few messages this logging is turned off, to avoid flooding the logs. You can disable this logging completely or adjust how many dead letters are logged. During system shutdown it is likely that you see dead letters, since pending messages in the actor mailboxes are sent to dead letters. You can also disable logging of dead letters during shutdown.

akka {
  log-dead-letters = 10
  log-dead-letters-during-shutdown = on
}

To customize the logging further or take other actions for dead letters you can subscribe to the Event Stream.

Auxiliary logging options

Akka has a few configuration options for very low level debugging. These make more sense in development than in production.

You almost definitely need to have logging set to DEBUG to use any of the options below:

akka {
  loglevel = "DEBUG"
}

This config option is very good if you want to know what config settings are loaded by Akka:

akka {
  # Log the complete configuration at INFO level when the actor system is started.
  # This is useful when you are uncertain of what configuration is used.
  log-config-on-start = on
}

akka {
  actor {
    debug {
      # enable function of LoggingReceive, which is to log any received message at
      # DEBUG level
      receive = on
    }
  }
}

If you want very detailed logging of all automatically received messages that are processed by Actors:

akka {
  actor {
    debug {
      # enable DEBUG logging of all AutoReceiveMessages (Kill, PoisonPill etc.)
      autoreceive = on
    }
  }
}

If you want very detailed logging of all lifecycle changes of Actors (restarts, deaths etc.):

akka {
  actor {
    debug {
      # enable DEBUG logging of actor lifecycle changes
      lifecycle = on
    }
  }
}

If you want unhandled messages logged at DEBUG:

akka {
  actor {
    debug {
      # enable DEBUG logging of unhandled messages
      unhandled = on
    }
  }
}

If you want very detailed logging of all events, transitions and timers of FSM Actors that extend LoggingFSM:

akka {
  actor {
    debug {
      # enable DEBUG logging of all LoggingFSMs for events, transitions and timers
      fsm = on
    }
  }
}

If you want to monitor subscriptions (subscribe/unsubscribe) on the ActorSystem.eventStream:

akka {
  actor {
    debug {
      # enable DEBUG logging of subscription changes on the eventStream
      event-stream = on
    }
  }
}

Auxiliary remote logging options

If you want to see all messages that are sent through remoting at DEBUG log level, use the following config option. Note that this logs the messages as they are sent by the transport layer, not by an actor.

akka.remote.artery {
  # If this is "on", Akka will log all outbound messages at DEBUG level,
  # if off then they are not logged
  log-sent-messages = on
}

If you want to see all messages that are received through remoting at DEBUG log level, use the following config option. Note that this logs the messages as they are received by the transport layer, not by an actor.

akka.remote.artery {
  # If this is "on", Akka will log all inbound messages at DEBUG level,
  # if off then they are not logged
  log-received-messages = on
}

Also see the logging options for TestKit.

copysourceimport akka.actor.ActorSystem
import akka.event.LogSource

object MyType {
  implicit val logSource: LogSource[AnyRef] = new LogSource[AnyRef] {
    def genString(o: AnyRef): String = o.getClass.getName
    override def getClazz(o: AnyRef): Class[_] = o.getClass
  }
}

class MyType(system: ActorSystem) {
  import MyType._
  import akka.event.Logging

  val log = Logging(system, this)
}

Turn Off Logging

To turn off logging you can configure the log levels to be OFF like this.

akka {
  stdout-loglevel = "OFF"
  loglevel = "OFF"
}

The stdout-loglevel is only in effect during system startup and shutdown, and setting it to OFF as well, ensures that nothing gets logged during system startup or shutdown.

Loggers

Logging is performed asynchronously through an event bus. Log events are processed by an event handler actor that receives the log events in the same order they were emitted.

You can configure which event handlers are created at system start-up and listen to logging events. That is done using the loggers element in the configuration. Here you can also define the log level. More fine grained filtering based on the log source can be implemented in a custom LoggingFilterLoggingFilter, which can be defined in the logging-filter configuration property.

akka {
  # Loggers to register at boot time (akka.event.Logging$DefaultLogger logs
  # to STDOUT)
  loggers = ["akka.event.Logging$DefaultLogger"]
  # Options: OFF, ERROR, WARNING, INFO, DEBUG
  loglevel = "DEBUG"
}

The default one logs to STDOUT and is registered by default. It is not intended to be used for production. There is also an SLF4J logger available in the ‘akka-slf4j’ module.

Example of creating a listener:

Scala

copysourceimport akka.event.Logging.Debug
import akka.event.Logging.Error
import akka.event.Logging.Info
import akka.event.Logging.InitializeLogger
import akka.event.Logging.LoggerInitialized
import akka.event.Logging.Warning

class MyEventListener extends Actor {
  def receive = {
    case InitializeLogger(_)                        => sender() ! LoggerInitialized
    case Error(cause, logSource, logClass, message) => // ...
    case Warning(logSource, logClass, message)      => // ...
    case Info(logSource, logClass, message)         => // ...
    case Debug(logSource, logClass, message)        => // ...
  }
}

Java

copysourceimport akka.actor.*;
import akka.event.Logging;
import akka.event.LoggingAdapter;

import akka.event.Logging.InitializeLogger;
import akka.event.Logging.Error;
import akka.event.Logging.Warning;
import akka.event.Logging.Info;
import akka.event.Logging.Debug;

copysourceclass MyEventListener extends AbstractActor {
  @Override
  public Receive createReceive() {
    return receiveBuilder()
        .match(
            InitializeLogger.class,
            msg -> {
              getSender().tell(Logging.loggerInitialized(), getSelf());
            })
        .match(
            Error.class,
            msg -> {
              // ...
            })
        .match(
            Warning.class,
            msg -> {
              // ...
            })
        .match(
            Info.class,
            msg -> {
              // ...
            })
        .match(
            Debug.class,
            msg -> {
              // ...
            })
        .build();
  }
}

Logging to stdout during startup and shutdown

When the actor system is starting up and shutting down the configured loggers are not used. Instead log messages are printed to stdout (System.out). The default log level for this stdout logger is WARNING and it can be silenced completely by setting akka.stdout-loglevel=OFF.

SLF4J

Akka provides a logger for SLF4J. This module is available in the ‘akka-slf4j.jar’. It has a single dependency: the slf4j-api jar. In your runtime, you also need a SLF4J backend. We recommend Logback:

sbt

val AkkaVersion = "2.9.7"
libraryDependencies ++= Seq(
  "com.typesafe.akka" %% "akka-slf4j" % AkkaVersion,
  "ch.qos.logback" % "logback-classic" % "1.2.13"
)

Maven

<properties>
  <scala.binary.version>2.13</scala.binary.version>
</properties>
<dependencyManagement>
  <dependencies>
    <dependency>
      <groupId>com.typesafe.akka</groupId>
      <artifactId>akka-bom_${scala.binary.version}</artifactId>
      <version>2.9.7</version>
      <type>pom</type>
      <scope>import</scope>
    </dependency>
  </dependencies>
</dependencyManagement>
<dependencies>
  <dependency>
    <groupId>com.typesafe.akka</groupId>
    <artifactId>akka-slf4j_${scala.binary.version}</artifactId>
  </dependency>
  <dependency>
    <groupId>ch.qos.logback</groupId>
    <artifactId>logback-classic</artifactId>
    <version>1.2.13</version>
  </dependency>
</dependencies>

Gradle

def versions = [
  ScalaBinary: "2.13"
]
dependencies {
  implementation platform("com.typesafe.akka:akka-bom_${versions.ScalaBinary}:2.9.7")

  implementation "com.typesafe.akka:akka-slf4j_${versions.ScalaBinary}"
  implementation "ch.qos.logback:logback-classic:1.2.13"
}

You need to enable the Slf4jLogger in the loggers element in the configuration. Here you can also define the log level of the event bus. More fine grained log levels can be defined in the configuration of the SLF4J backend (e.g. logback.xml). You should also define Slf4jLoggingFilterSlf4jLoggingFilter in the logging-filter configuration property. It will filter the log events using the backend configuration (e.g. logback.xml) before they are published to the event bus.

akka {
  loggers = ["akka.event.slf4j.Slf4jLogger"]
  loglevel = "DEBUG"
  logging-filter = "akka.event.slf4j.Slf4jLoggingFilter"
}

One gotcha is that the timestamp is attributed in the event handler, not when actually doing the logging.

The SLF4J logger selected for each log event is chosen based on the Class[_] Class of the log source specified when creating the LoggingAdapterLoggingAdapter, unless that was given directly as a string in which case that string is used (i.e. LoggerFactory.getLogger(c: Class[_ ]) LoggerFactory.getLogger(Class c) is used in the first case and LoggerFactory.getLogger(s: String) LoggerFactory.getLogger(String s) in the second).

Scala

val log = Logging(system.eventStream, "my.nice.string")

Java

final LoggingAdapter log = Logging.getLogger(system.eventStream(), "my.string");

Using the SLF4J API directly

If you use the SLF4J API directly in your application, remember that the logging operations will block while the underlying infrastructure writes the log statements.

This can be avoided by configuring the logging implementation to use a non-blocking appender. Logback provides AsyncAppender that does this.

Logback configuration

Logback has flexible configuration options and details can be found in the Logback manual and other external resources.

One part that is important to highlight is the importance of configuring an AsyncAppender, because it offloads rendering of logging events to a background thread, increasing performance. It doesn’t block the threads of the ActorSystemActorSystem while the underlying infrastructure writes the log messages to disk or other configured destination. It also contains a feature which will drop INFO and DEBUG messages if the logging load is high.

A starting point for configuration of logback.xml for production:

copysource<?xml version="1.0" encoding="UTF-8"?>
<configuration>

    <appender name="FILE" class="ch.qos.logback.core.rolling.RollingFileAppender">
        <file>myapp.log</file>
        <immediateFlush>false</immediateFlush>
        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
            <fileNamePattern>myapp_%d{yyyy-MM-dd}.log</fileNamePattern>
        </rollingPolicy>
        <encoder>
            <pattern>[%date{ISO8601}] [%level] [%logger] [%marker] [%thread] - %msg MDC: {%mdc}%n</pattern>
        </encoder>
    </appender>

    <appender name="ASYNC" class="ch.qos.logback.classic.AsyncAppender">
        <queueSize>8192</queueSize>
        <neverBlock>true</neverBlock>
        <appender-ref ref="FILE" />
    </appender>

    <root level="INFO">
        <appender-ref ref="ASYNC"/>
    </root>
</configuration>

For development you might want to log to standard out, but also have all DEBUG level logging to file, like in this example:

copysource<?xml version="1.0" encoding="UTF-8"?>
<configuration>

    <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
        <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
            <level>INFO</level>
        </filter>
        <encoder>
            <pattern>[%date{ISO8601}] [%level] [%logger] [%marker] [%thread] - %msg MDC: {%mdc}%n</pattern>
        </encoder>
    </appender>

    <appender name="FILE" class="ch.qos.logback.core.FileAppender">
        <file>target/myapp-dev.log</file>
        <encoder>
            <pattern>[%date{ISO8601}] [%level] [%logger] [%marker] [%thread] - %msg MDC: {%mdc}%n</pattern>
        </encoder>
    </appender>

    <root level="DEBUG">
        <appender-ref ref="STDOUT"/>
        <appender-ref ref="FILE"/>
    </root>
</configuration>

Place the logback.xml file in src/main/resources/logback.xml. For tests you can define different logging configuration in src/test/resources/logback-test.xml.

MDC properties can be included in the Logback output with for example %X{akkaSource} specifier within the pattern layout configuration:

  <encoder>
    <pattern>%date{ISO8601} %-5level %logger{36} %X{akkaSource} - %msg%n</pattern>
  </encoder>

All MDC properties as key-value entries can be included with %mdc:

  <encoder>
    <pattern>%date{ISO8601} %-5level %logger{36} - %msg MDC: {%mdc}%n</pattern>
  </encoder>

Logging Thread, Akka Source and Actor System in MDC

Since the logging is done asynchronously the thread in which the logging was performed is captured in Mapped Diagnostic Context (MDC) with attribute name sourceThread.

Another helpful facility is that Akka captures the actor’s address when instantiating a logger within it, meaning that the full instance identification is available for associating log messages e.g. with members of a router. This information is available in the MDC with attribute name akkaSource.

The address of the actor system, containing host and port if the system is using cluster, is available through akkaAddress.

Finally, the actor system in which the logging was performed is available in the MDC with attribute name sourceActorSystem.

For more details on what this attribute contains—also for non-actors—please see How to Log.

More accurate timestamps for log output in MDC

Akka’s logging is asynchronous which means that the timestamp of a log entry is taken from when the underlying logger implementation is called, which can be surprising at first. If you want to more accurately output the timestamp, use the MDC attribute akkaTimestamp.

MDC values defined by the application

One useful feature available in Slf4j is MDC, Akka has a way to let the application specify custom values, for this you need to use a specialized LoggingAdapterLoggingAdapter, the DiagnosticLoggingAdapterDiagnosticLoggingAdapter. In order to get it you can use the factory, providing an Actor AbstractActor as logSource:

Scala

// Within your Actor
val log: DiagnosticLoggingAdapter = Logging(this);

Java

// Within your AbstractActor
final DiagnosticLoggingAdapter log = Logging.getLogger(this);

Once you have the logger, you need to add the custom values before you log something. This way, the values will be put in the SLF4J MDC right before appending the log and removed after.

Scala

copysourceval mdc = Map("requestId" -> 1234, "visitorId" -> 5678)
log.mdc(mdc)

// Log something
log.info("Starting new request")

log.clearMDC()

Java

copysourceimport akka.event.DiagnosticLoggingAdapter;
import java.util.HashMap;
import java.util.Map;

copysourceclass MdcActor extends AbstractActor {

  final DiagnosticLoggingAdapter log = Logging.getLogger(this);

  @Override
  public Receive createReceive() {
    return receiveBuilder()
        .matchAny(
            msg -> {
              Map<String, Object> mdc;
              mdc = new HashMap<String, Object>();
              mdc.put("requestId", 1234);
              mdc.put("visitorId", 5678);
              log.setMDC(mdc);

              log.info("Starting new request");

              log.clearMDC();
            })
        .build();
  }
}

copysourceimport Logging.MDC

final case class Req(work: String, visitorId: Int)

class MdcActorMixin extends Actor with akka.actor.DiagnosticActorLogging {
  var reqId = 0

  override def mdc(currentMessage: Any): MDC = {
    reqId += 1
    val always = Map("requestId" -> reqId)
    val perMessage = currentMessage match {
      case r: Req => Map("visitorId" -> r.visitorId)
      case _      => Map()
    }
    always ++ perMessage
  }

  def receive: Receive = {
    case r: Req => {
      log.info(s"Starting new request: ${r.work}")
    }
  }
}

Now, the values will be available in the MDC, so you can use them in the layout pattern:

<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
  <encoder>
    <pattern>
      %-5level %logger{36} [req: %X{requestId}, visitor: %X{visitorId}] - %msg%n
    </pattern>
  </encoder>
</appender>

All MDC properties as key-value entries can be included with %mdc:

  <encoder>
    <pattern>%date{ISO8601} %-5level %logger{36} - %msg MDC: {%mdc}%n</pattern>
  </encoder>

Using Markers

Some logging libraries allow, in addition to MDC data, attaching so called “markers” to log statements. These are used to filter out rare and special events, for example you might want to mark logs that detect some malicious activity and mark them with a SECURITY tag, and in your appender configuration make these trigger emails and other notifications immediately.

Markers are available through the LoggingAdapters, when obtained via Logging.withMarkerLogging.withMarker. The first argument passed into all log calls then should be a .

The slf4j bridge provided by Akka in akka-slf4j will automatically pick up this marker value and make it available to SLF4J.

Akka is logging some events with markers. Some of these events also include structured MDC properties.

• The “SECURITY” marker is used for highlighting security related events or incidents.
• Akka Actor is using the markers defined in ActorLogMarkerActorLogMarker.
• Akka Cluster is using the markers defined in ClusterLogMarkerClusterLogMarker.
• Akka Remoting is using the markers defined in RemoteLogMarkerRemoteLogMarker.
• Akka Cluster Sharding is using the markers defined in ShardingLogMarkerShardingLogMarker.

Markers and MDC properties are automatically picked up by the Logstash Logback encoder.

The marker can be included in the Logback output with %marker and all MDC properties as key-value entries with %mdc.

  <encoder>
    <pattern>[%date{ISO8601}] [%level] [%logger] [%marker] [%thread] - %msg MDC: {%mdc}%n</pattern>
  </encoder>

Using SLF4J’s Markers

It is also possible to use the org.slf4j.Marker with the LoggingAdapterLoggingAdapter when using slf4j.

Since the akka-actor library avoids depending on any specific logging library, the support for this is included in akka-slf4j, which provides the Slf4jLogMarkerSlf4jLogMarker type which can be passed in as first argument instead of the logging framework agnostic LogMarker type from akka-actor. The most notable difference between the two is that slf4j’s Markers can have child markers, so one can rely more information using them rather than just a single string.