Rejections

In the chapter about constructing Routes the ~ operatorRouteDirectives.route() method was introduced, which connects two or more routes in a way that allows the next specified route to get a go at a request if the first route “rejected” it. The concept of “rejections” is used by Akka HTTP for maintaining a more functional overall architecture and in order to be able to properly handle all kinds of error scenarios.

When a filtering directive, like the get directive, cannot let the request pass through to its inner route because the filter condition is not satisfied (e.g. because the incoming request is not a GET request) the directive doesn’t immediately complete the request with an error response. Doing so would make it impossible for other routes chained in after the failing filter to get a chance to handle the request. Rather, failing filters “reject” the request in the same way as by explicitly calling requestContext.reject(...).

After having been rejected by a route the request will continue to flow through the routing structure and possibly find another route that can complete it. If there are more rejections all of them will be picked up and collected.

If the request cannot be completed by (a branch of) the route structure an enclosing handleRejections directive can be used to convert a set of rejections into an HttpResponseHttpResponse - which typically would be an error response. Route.seal() internally wraps its argument route with the handleRejections directive in order to “catch” and handle any rejection.

Predefined Rejections

A rejection encapsulates a specific reason why a route was not able to handle a request. It is modeled as an object of type RejectionRejection. Akka HTTP comes with a set of predefined rejectionspredefined rejections, which are used by the many predefined directives.

Rejections are gathered up over the course of a Route evaluation and finally converted to HttpResponseHttpResponse replies by the handleRejections directive if there was no way for the request to be completed.

The RejectionHandler

The handleRejections directive delegates the actual job of converting a list of rejections to the provided RejectionHandlerRejectionHandler, so it can choose whether it would like to handle the current set of rejections or not. Unhandled rejections will simply continue to flow through the route structure.

The default RejectionHandler applied by the top-level glue code that turns a RouteRoute into a FlowFlow or async handler function for the low-level API (via Route.toFlow or Route.toFunction) will handle all rejections that reach it.

Note

Please note that since version 10.1.2, the default RejectionHandler will also discard the entity bytes automatically. If you want to change this behavior, please refer to Customising rejection HTTP Responses; however, might cause connections to stall if the entity is not properly rejected or cancelled on the client side.

Rejection Cancellation

As mentioned above, the RejectionHandler doesn’t handle single rejections but a whole list of them. This is because some route structure produce several “reasons” why a request could not be handled.

Take this route structure for example:

Scala
sourceimport akka.http.scaladsl.coding.Coders

val route =
  path("order") {
    concat(
      get {
        complete("Received GET")
      },
      post {
        decodeRequestWith(Coders.Gzip) {
          complete("Received compressed POST")
        }
      }
    )
  }
Java
sourceimport static akka.http.javadsl.server.Directives.complete;
import static akka.http.javadsl.server.Directives.decodeRequestWith;
import static akka.http.javadsl.server.Directives.get;
import static akka.http.javadsl.server.Directives.path;
import static akka.http.javadsl.server.Directives.post;
final Route route = path("order", () ->
  concat(
    get(() ->
      complete("Received GET")
    ),
    post(() ->
      decodeRequestWith(Coder.Gzip, () ->
        complete("Received compressed POST")
      )
    )
  ));

For uncompressed POST requests this route structure would initially yield two rejections:

In reality the route even generates one more rejection, a TransformationRejectionTransformationRejection produced by the post directive. It “cancels” all other potentially existing MethodRejections, since they are invalid after the post directive allowed the request to pass (after all, the route structure can deal with POST requests). These types of rejection cancellations are resolved before a RejectionHandler is called with any rejection. So, for the example above the RejectionHandler will be presented with only one single rejection, the UnsupportedRequestEncodingRejectionUnsupportedRequestEncodingRejection.

Empty Rejections

Internally rejections are stored in an immutable list, so you might ask yourself what the semantics of an empty rejection list are. In fact, empty rejection lists have well defined semantics. They signal that a request was not handled because the respective resource could not be found. Akka HTTP reserves the special status of “empty rejection” to this most common failure a service is likely to produce.

So, for example, if the path directive rejects a request it does so with an empty rejection list. The host directive behaves in the same way.

Customizing Rejection Handling

If you’d like to customize the way certain rejections are handled you’ll have to write a custom RejectionHandler. Here is an example:

Scala
sourceimport akka.actor.ActorSystem
import akka.http.scaladsl.Http
import akka.http.scaladsl.model._
import akka.http.scaladsl.server._
import StatusCodes._
import Directives._

object MyApp extends App {
  def myRejectionHandler =
    RejectionHandler.newBuilder()
      .handle {
        case MissingCookieRejection(cookieName) =>
          complete(HttpResponse(BadRequest, entity = "No cookies, no service!!!"))
      }
      .handle {
        case AuthorizationFailedRejection =>
          complete(Forbidden, "You're out of your depth!")
      }
      .handle {
        case ValidationRejection(msg, _) =>
          complete(InternalServerError, "That wasn't valid! " + msg)
      }
      .handleAll[MethodRejection] { methodRejections =>
        val names = methodRejections.map(_.supported.name)
        complete(MethodNotAllowed, s"Can't do that! Supported: ${names mkString " or "}!")
      }
      .handleNotFound { complete((NotFound, "Not here!")) }
      .result()

  implicit val system: ActorSystem = ActorSystem()

  val route: Route = handleRejections(myRejectionHandler) {
    // ... some route structure
  }

  Http().newServerAt("localhost", 8080).bind(route)
}
Java
sourceimport static akka.http.javadsl.server.Directives.complete;
import static akka.http.javadsl.server.Directives.path;
import static akka.http.javadsl.server.Directives.handleRejections;

final RejectionHandler rejectionHandler = RejectionHandler.newBuilder()
  .handle(MissingCookieRejection.class, rej ->
    complete(StatusCodes.BAD_REQUEST, "No cookies, no service!!!")
  )
  .handle(AuthorizationFailedRejection.class, rej ->
    complete(StatusCodes.FORBIDDEN, "You're out of your depth!")
  )
  .handle(ValidationRejection.class, rej ->
    complete(StatusCodes.INTERNAL_SERVER_ERROR, "That wasn't valid! " + rej.message())
  )
  .handleAll(MethodRejection.class, rejections -> {
    String supported = rejections.stream()
      .map(rej -> rej.supported().name())
      .collect(Collectors.joining(" or "));
    return complete(StatusCodes.METHOD_NOT_ALLOWED, "Can't do that! Supported: " + supported + "!");
  })
  .handleNotFound(complete(StatusCodes.NOT_FOUND, "Not here!"))
  .build();

// Route that will be bound to the Http
final Route wrapped = handleRejections(rejectionHandler,
  this::getRoute); // Some route structure for this Server

The easiest way to construct a RejectionHandler is with RejectionHandler.newBuilder() that Akka HTTP provides. After having created a new Builder instance you can attach handling logic for certain types of rejections through three helper methods:

handle(PartialFunction[Rejection, Route])handle(Class, Function<T, Route>)
Handles the provided type of rejections with the given function. The provided function simply produces a RouteRoute which is run when the rejection is “caught”. This makes the full power of the Routing DSL available for defining rejection handlers and even allows for recursing back into the main route structure if required.
handleAll[T <: Rejection: ClassTag](f: immutable.Seq[T] => Route)handleAll(Class, Function<List, Route>)
Handles all rejections of a certain type at the same time. This is useful for cases where your need access to more than the first rejection of a certain type, e.g. for producing the error message to an unsupported request method.
handleNotFound(Route)
As described above “Resource Not Found” is special as it is represented with an empty rejection set. The handleNotFound helper let’s you specify the “recovery route” for this case.

Even though you could handle several different rejection types in a single partial function supplied to handle by “listening” to the Rejection.class, it is recommended to split these up into distinct handle attachments instead. This way the priority between rejections is properly defined via the order of your handle clauses rather than the (sometimes hard to predict or control) order of rejections in the rejection set.

Once you have defined your custom RejectionHandler you have two options for “activating” it:

  1. Bring it into implicit scope at the top-levelPass it to the seal() method of the Route class
  2. Supply it as an argument to the handleRejections directive

In the first case your handler will be “sealed” (which means that it will receive the default handler as a fallback for all cases your handler doesn’t handle itself) and used for all rejections that are not handled within the route structure itself.

The second case allows you to restrict the applicability of your handler to certain branches of your route structure.

Customising rejection HTTP Responses

It is also possible to customise just the responses that are returned by a defined rejection handler. This can be useful for example if you like the rejection messages and status codes of the default handler, however you’d like to wrap those responses in JSON or some other content type.

Please note that since those are not 200 responses, a different content type than the one that was sent in a client’s AcceptAccept header is legal. Thus the default handler renders such rejections as text/plain.

In order to customise the HTTP Responses of an existing handler you can call the mapRejectionResponse method on such handler as shown in the example below:

Scala
sourceimport akka.http.scaladsl.model._
import akka.http.scaladsl.server.RejectionHandler

implicit def myRejectionHandler: RejectionHandler =
  RejectionHandler.default
    .mapRejectionResponse {
      case res @ HttpResponse(_, _, ent: HttpEntity.Strict, _) =>
        // since all Akka default rejection responses are Strict this will handle all rejections
        val message = ent.data.utf8String.replaceAll("\"", """\"""")

        // we copy the response in order to keep all headers and status code, wrapping the message as hand rolled JSON
        // you could the entity using your favourite marshalling library (e.g. spray json or anything else)
        res.withEntity(HttpEntity(ContentTypes.`application/json`, s"""{"rejection": "$message"}"""))

      case x => x // pass through all other types of responses
    }

val route =
  Route.seal(
    path("hello") {
      complete("Hello there")
    }
  )

// tests:
Get("/nope") ~> route ~> check {
  status shouldEqual StatusCodes.NotFound
  contentType shouldEqual ContentTypes.`application/json`
  responseAs[String] shouldEqual """{"rejection": "The requested resource could not be found."}"""
}

val anotherRoute =
  Route.seal(
    validate(check = false, "Whoops, bad request!") {
      complete("Hello there")
    }
  )

// tests:
Get("/hello") ~> anotherRoute ~> check {
  status shouldEqual StatusCodes.BadRequest
  contentType shouldEqual ContentTypes.`application/json`
  responseAs[String] shouldEqual """{"rejection": "Whoops, bad request!"}"""
}
Java
sourceimport static akka.http.javadsl.server.Directives.complete;
import static akka.http.javadsl.server.Directives.path;
import static akka.http.javadsl.server.Directives.handleRejections;
import static akka.http.javadsl.server.Directives.validate;

final RejectionHandler rejectionHandler = RejectionHandler.defaultHandler()
  .mapRejectionResponse(response -> {
    if (response.entity() instanceof HttpEntity.Strict) {
      // since all Akka default rejection responses are Strict this will handle all rejections
      String message = ((HttpEntity.Strict) response.entity()).getData().utf8String()
        .replaceAll("\"", "\\\"");
      // we create a new copy the response in order to keep all headers and status code,
      // replacing the original entity with a custom message as hand rolled JSON you could the
      // entity using your favourite marshalling library (e.g. spray json or anything else)
      return response.withEntity(ContentTypes.APPLICATION_JSON,
        "{\"rejection\": \"" + message + "\"}");
    } else {
      // pass through all other types of responses
      return response;
    }
  });

Route route = handleRejections(rejectionHandler, () ->
  path("hello", () ->
    complete("Hello there")
  ));

// tests:
testRoute(route)
  .run(HttpRequest.GET("/nope"))
  .assertStatusCode(StatusCodes.NOT_FOUND)
  .assertContentType(ContentTypes.APPLICATION_JSON)
  .assertEntity("{\"rejection\": \"The requested resource could not be found.\"}");

Route anotherOne = handleRejections(rejectionHandler, () ->
  validate(() -> false, "Whoops, bad request!", () ->
    complete("Hello there")
));

// tests:
testRoute(anotherOne)
  .run(HttpRequest.GET("/hello"))
  .assertStatusCode(StatusCodes.BAD_REQUEST)
  .assertContentType(ContentTypes.APPLICATION_JSON)
  .assertEntity("{\"rejection\": \"Whoops, bad request!\"}");

Adding the unmatched route in handleNotFound

Since rejection handlers are routes themselves, it is possible to do anything you could possibly want inside such handler. For example you may want to include the path which was not found in the response to the client, this is as simple as using the extractUnmatchedPath and completing the route with it.

Scala
sourceimport akka.http.scaladsl.model.StatusCodes._
import akka.http.scaladsl.server._
import Directives._

implicit def myRejectionHandler: RejectionHandler =
  RejectionHandler.newBuilder()
    .handleNotFound {
      extractUnmatchedPath { p =>
        complete(NotFound, s"The path you requested [${p}] does not exist.")
      }
    }
    .result()
Java
sourceimport akka.http.javadsl.server.Directives;

import static akka.http.javadsl.server.Directives.complete;
import static akka.http.javadsl.server.Directives.extractUnmatchedPath;
import static akka.http.javadsl.server.Directives.handleRejections;
import static akka.http.javadsl.server.Directives.reject;

final RejectionHandler totallyMissingHandler = RejectionHandler.newBuilder()
  .handleNotFound(
    extractUnmatchedPath(path ->
      complete(StatusCodes.NOT_FOUND, "The path " + path + " was not found!")
    )
  )
  .build();

final Route route = 
  handleRejections(totallyMissingHandler, () ->
  pathPrefix("handled", () ->
    Directives.concat(
      path("existing", () -> complete("This path exists"))
    )
  )
);

// tests:
testRoute(route).run(HttpRequest.GET("/handled/existing"))
  .assertEntity("This path exists");
// applies default handler
testRoute(route).run(HttpRequest.GET("/missing"))
  .assertStatusCode(StatusCodes.NOT_FOUND)
  .assertEntity("The path /missing was not found!");
testRoute(route).run(HttpRequest.GET("/handled/missing"))
  .assertStatusCode(StatusCodes.NOT_FOUND)
  .assertEntity("The path /handled/missing was not found!");

If you want to add even more information you can obtain the full request by using extractRequest as well.

Found an error in this documentation? The source code for this page can be found here. Please feel free to edit and contribute a pull request.