Client-Side WebSocket Support

Client-side WebSocket support is available through Http().singleWebSocketRequestHttp.get(system).singleWebSocketRequest, Http().webSocketClientFlowHttp.get(system).webSocketClientFlow and Http().webSocketClientLayerHttp.get(system).webSocketClientLayer.

A WebSocket consists of two streams of messages, incoming messages (a SinkSink) and outgoing messages (a SourceSource) where either may be signalled first; or even be the only direction in which messages flow during the lifetime of the connection. Therefore a WebSocket connection is modelled as either something you connect a Flow<Message, Message, Mat>Flow[Message, Message, Mat] to or a Flow<Message, Message, Mat>Flow[Message, Message, Mat] that you connect a Source<Message, Mat>Source[Message, Mat] and a Sink<Message, Mat>Sink[Message, Mat] to.

A WebSocket request starts with a regular HTTP request which contains an Upgrade header (and possibly other regular HTTP request properties), so in addition to the flow of messages there also is an initial response from the server, this is modelled with WebSocketUpgradeResponseWebSocketUpgradeResponse.

The methods of the WebSocket client API handle the upgrade to WebSocket on connection success and materializes the connected WebSocket stream. If the connection fails, for example with a 404 NotFound error, this regular HTTP result can be found in WebSocketUpgradeResponse.response

Message

Messages sent and received over a WebSocket can be either TextMessageTextMessage s or BinaryMessageBinaryMessage s and each of those has two subtypes Strict (all data in one chunk) or Streamed. In typical applications messages will be Strict as WebSockets are usually deployed to communicate using small messages not stream data, the protocol does however allow this (by not marking the first fragment as final, as described in RFC 6455 section 5.2).

The strict text is available from TextMessage.StrictTextMessage.getStrictText and strict binary data from BinaryMessage.StrictBinaryMessage.getStrictData.

For streamed messages BinaryMessage.StreamedBinaryMessage.getStreamedData and TextMessage.StreamedTextMessage.getStreamedText will be used. In these cases the data is provided as a Source<ByteString, ?>Source[ByteString, _] for binary and Source<String, ?>Source[String, _] for text messages.

singleWebSocketRequest

singleWebSocketRequest takes a WebSocketRequestWebSocketRequest and a flow it will connect to the source and sink of the WebSocket connection. It will trigger the request right away and returns a tuple containing the Future[WebSocketUpgradeResponse]CompletionStage<WebSocketUpgradeResponse> and the materialized value from the flow passed to the method.

The future will succeed when the WebSocket connection has been established or the server returned a regular HTTP response, or fail if the connection fails with an exception.

Simple example sending a message and printing any incoming message:

Scala

copysource/*
 * Copyright (C) 2020-2022 Lightbend Inc. <https://www.lightbend.com>
 */

package docs.http.scaladsl

import akka.actor.ActorSystem
import akka.{ Done, NotUsed }
import akka.http.scaladsl.Http
import akka.stream.scaladsl._
import akka.http.scaladsl.model._
import akka.http.scaladsl.model.ws._

import scala.concurrent.Future

object SingleWebSocketRequest {
  def main(args: Array[String]): Unit = {
    implicit val system = ActorSystem()
    import system.dispatcher

    // print each incoming strict text message
    val printSink: Sink[Message, Future[Done]] =
      Sink.foreach {
        case message: TextMessage.Strict =>
          println(message.text)
        case _ =>
        // ignore other message types
      }

    val helloSource: Source[Message, NotUsed] =
      Source.single(TextMessage("hello world!"))

    // the Future[Done] is the materialized value of Sink.foreach
    // and it is completed when the stream completes
    val flow: Flow[Message, Message, Future[Done]] =
      Flow.fromSinkAndSourceMat(printSink, helloSource)(Keep.left)

    // upgradeResponse is a Future[WebSocketUpgradeResponse] that
    // completes or fails when the connection succeeds or fails
    // and closed is a Future[Done] representing the stream completion from above
    val (upgradeResponse, closed) =
      Http().singleWebSocketRequest(WebSocketRequest("ws://echo.websocket.org"), flow)

    val connected = upgradeResponse.map { upgrade =>
      // just like a regular http request we can access response status which is available via upgrade.response.status
      // status code 101 (Switching Protocols) indicates that server support WebSockets
      if (upgrade.response.status == StatusCodes.SwitchingProtocols) {
        Done
      } else {
        throw new RuntimeException(s"Connection failed: ${upgrade.response.status}")
      }
    }

    // in a real application you would not side effect here
    // and handle errors more carefully
    connected.onComplete(println)
    closed.foreach(_ => println("closed"))
  }
}

Java

copysourceActorSystem system = ActorSystem.create();
Materializer materializer = ActorMaterializer.create(system);
Http http = Http.get(system);

// print each incoming text message
// would throw exception on non strict or binary message
final Sink<Message, CompletionStage<Done>> printSink =
  Sink.foreach((message) ->
    System.out.println("Got message: " + message.asTextMessage().getStrictText())
  );

// send this as a message over the WebSocket
final Source<Message, NotUsed> helloSource =
  Source.single(TextMessage.create("hello world"));

// the CompletionStage<Done> is the materialized value of Sink.foreach
// and it is completed when the stream completes
final Flow<Message, Message, CompletionStage<Done>> flow =
  Flow.fromSinkAndSourceMat(printSink, helloSource, Keep.left());

final Pair<CompletionStage<WebSocketUpgradeResponse>, CompletionStage<Done>> pair =
  http.singleWebSocketRequest(
    WebSocketRequest.create("ws://echo.websocket.org"),
    flow,
    materializer
  );

// The first value in the pair is a CompletionStage<WebSocketUpgradeResponse> that
// completes when the WebSocket request has connected successfully (or failed)
final CompletionStage<Done> connected = pair.first().thenApply(upgrade -> {
  // just like a regular http request we can access response status which is available via upgrade.response.status
  // status code 101 (Switching Protocols) indicates that server support WebSockets
  if (upgrade.response().status().equals(StatusCodes.SWITCHING_PROTOCOLS)) {
    return Done.getInstance();
  } else {
    throw new RuntimeException("Connection failed: " + upgrade.response().status());
  }
});

// the second value is the completion of the sink from above
// in other words, it completes when the WebSocket disconnects
final CompletionStage<Done> closed = pair.second();

// in a real application you would not side effect here
// and handle errors more carefully
connected.thenAccept(done -> System.out.println("Connected"));
closed.thenAccept(done -> System.out.println("Connection closed"));

The websocket request may also include additional headers, like in this example, HTTP Basic Auth:

Scala

copysourceval (upgradeResponse, _) =
  Http().singleWebSocketRequest(
    WebSocketRequest(
      "ws://example.com:8080/some/path",
      extraHeaders = Seq(Authorization(
        BasicHttpCredentials("johan", "correcthorsebatterystaple")))),
    flow)

Java

copysourcehttp.singleWebSocketRequest(
  WebSocketRequest.create("ws://example.com:8080/some/path")
    .addHeader(Authorization.basic("johan", "correcthorsebatterystaple")),
  flow,
  materializer);

webSocketClientFlow

webSocketClientFlow takes a request, and returns a Flow<Message, Message, Future<WebSocketUpgradeResponse>>Flow[Message, Message, Future[WebSocketUpgradeResponse]]Flow<Message, Message, CompletionStage<WebSocketUpgradeResponse>>Flow[Message, Message, CompletionStage[WebSocketUpgradeResponse]].

The future that is materialized from the flow will succeed when the WebSocket connection has been established or the server returned a regular HTTP response, or fail if the connection fails with an exception.

Simple example sending a message and printing any incoming message:

Scala

copysource/*
 * Copyright (C) 2020-2022 Lightbend Inc. <https://www.lightbend.com>
 */

package docs.http.scaladsl

import akka.actor.ActorSystem
import akka.Done
import akka.http.scaladsl.Http
import akka.stream.scaladsl._
import akka.http.scaladsl.model._
import akka.http.scaladsl.model.ws._

import scala.concurrent.Future

object WebSocketClientFlow {
  def main(args: Array[String]): Unit = {
    implicit val system = ActorSystem()
    import system.dispatcher

    // Future[Done] is the materialized value of Sink.foreach,
    // emitted when the stream completes
    val incoming: Sink[Message, Future[Done]] =
      Sink.foreach[Message] {
        case message: TextMessage.Strict =>
          println(message.text)
        case _ =>
        // ignore other message types
      }

    // send this as a message over the WebSocket
    val outgoing = Source.single(TextMessage("hello world!"))

    // flow to use (note: not re-usable!)
    val webSocketFlow = Http().webSocketClientFlow(WebSocketRequest("ws://echo.websocket.org"))

    // the materialized value is a tuple with
    // upgradeResponse is a Future[WebSocketUpgradeResponse] that
    // completes or fails when the connection succeeds or fails
    // and closed is a Future[Done] with the stream completion from the incoming sink
    val (upgradeResponse, closed) =
      outgoing
        .viaMat(webSocketFlow)(Keep.right) // keep the materialized Future[WebSocketUpgradeResponse]
        .toMat(incoming)(Keep.both) // also keep the Future[Done]
        .run()

    // just like a regular http request we can access response status which is available via upgrade.response.status
    // status code 101 (Switching Protocols) indicates that server support WebSockets
    val connected = upgradeResponse.flatMap { upgrade =>
      if (upgrade.response.status == StatusCodes.SwitchingProtocols) {
        Future.successful(Done)
      } else {
        throw new RuntimeException(s"Connection failed: ${upgrade.response.status}")
      }
    }

    // in a real application you would not side effect here
    connected.onComplete(println)
    closed.foreach(_ => println("closed"))
  }
}

Java

copysourceActorSystem system = ActorSystem.create();
Materializer materializer = ActorMaterializer.create(system);
Http http = Http.get(system);

// print each incoming text message
// would throw exception on non strict or binary message
Sink<Message, CompletionStage<Done>> printSink =
  Sink.foreach((message) ->
      System.out.println("Got message: " + message.asTextMessage().getStrictText())
  );

// send this as a message over the WebSocket
Source<Message, NotUsed> helloSource =
  Source.single(TextMessage.create("hello world"));


Flow<Message, Message, CompletionStage<WebSocketUpgradeResponse>> webSocketFlow =
  http.webSocketClientFlow(WebSocketRequest.create("ws://echo.websocket.org"));


Pair<CompletionStage<WebSocketUpgradeResponse>, CompletionStage<Done>> pair =
  helloSource.viaMat(webSocketFlow, Keep.right())
    .toMat(printSink, Keep.both())
    .run(materializer);


// The first value in the pair is a CompletionStage<WebSocketUpgradeResponse> that
// completes when the WebSocket request has connected successfully (or failed)
CompletionStage<WebSocketUpgradeResponse> upgradeCompletion = pair.first();

// the second value is the completion of the sink from above
// in other words, it completes when the WebSocket disconnects
CompletionStage<Done> closed = pair.second();

CompletionStage<Done> connected = upgradeCompletion.thenApply(upgrade->
{
  // just like a regular http request we can access response status which is available via upgrade.response.status
  // status code 101 (Switching Protocols) indicates that server support WebSockets
  if (upgrade.response().status().equals(StatusCodes.SWITCHING_PROTOCOLS)) {
    return Done.getInstance();
  } else {
    throw new RuntimeException(("Connection failed: " + upgrade.response().status()));
  }
});

// in a real application you would not side effect here
// and handle errors more carefully
connected.thenAccept(done -> System.out.println("Connected"));
closed.thenAccept(done -> System.out.println("Connection closed"));

webSocketClientLayer

Just like the Stand-Alone HTTP Layer Usage for regular HTTP requests, the WebSocket layer can be used fully detached from the underlying TCP interface. The same scenarios as described for regular HTTP requests apply here.

The returned layer forms a BidiFlow<Message, SslTlsOutbound, SslTlsInbound, Message, Future<WebSocketUpgradeResponse>>BidiFlow[Message, SslTlsOutbound, SslTlsInbound, Message, Future[WebSocketUpgradeResponse]]BidiFlow<Message, SslTlsOutbound, SslTlsInbound, Message, CompletionStage<WebSocketUpgradeResponse>>BidiFlow[Message, SslTlsOutbound, SslTlsInbound, Message, CompletionStage[WebSocketUpgradeResponse]].

Half-Closed WebSockets

The Akka HTTP WebSocket API does not support half-closed connections which means that if either stream completes the entire connection is closed (after a “Closing Handshake” has been exchanged or a timeout of 3 seconds has passed). This may lead to unexpected behavior, for example if we are trying to only consume messages coming from the server, like this:

Scala

copysource
// we may expect to be able to to just tail
// the server websocket output like this
val flow: Flow[Message, Message, NotUsed] =
  Flow.fromSinkAndSource(
    Sink.foreach(println),
    Source.empty)

Http().singleWebSocketRequest(
  WebSocketRequest("ws://example.com:8080/some/path"),
  flow)

Java

copysource
// we may expect to be able to to just tail
// the server websocket output like this
final Flow<Message, Message, NotUsed> flow =
  Flow.fromSinkAndSource(
    Sink.foreach(System.out::println),
    Source.empty());

http.singleWebSocketRequest(
  WebSocketRequest.create("ws://example.com:8080/some/path"),
  flow,
  materializer);

This will in fact quickly close the connection because of the Source.emptySource.empty() being completed immediately when the stream is materialized. To solve this you can make sure to not complete the outgoing source by using for example Source.maybeSource.maybe() like this:

Scala

copysource
// using Source.maybe materializes into a promise
// which will allow us to complete the source later
val flow: Flow[Message, Message, Promise[Option[Message]]] =
  Flow.fromSinkAndSourceMat(
    Sink.foreach[Message](println),
    Source.maybe[Message])(Keep.right)

val (upgradeResponse, promise) =
  Http().singleWebSocketRequest(
    WebSocketRequest("ws://example.com:8080/some/path"),
    flow)

// at some later time we want to disconnect
promise.success(None)

Java

copysource
// using Source.maybe materializes into a completable future
// which will allow us to complete the source later
final Flow<Message, Message, CompletableFuture<Optional<Message>>> flow =
  Flow.fromSinkAndSourceMat(
    Sink.foreach(System.out::println),
    Source.maybe(),
    Keep.right());

final Pair<CompletionStage<WebSocketUpgradeResponse>, CompletableFuture<Optional<Message>>> pair =
  http.singleWebSocketRequest(
    WebSocketRequest.create("ws://example.com:8080/some/path"),
    flow,
    materializer);

// at some later time we want to disconnect
pair.second().complete(Optional.empty());

This will keep the outgoing source from completing, but without emitting any elements until the PromiseCompletableFuture is manually completed which makes the SourceSource complete and the connection to close.

The same problem holds true if emitting a finite number of elements, as soon as the last element is reached the SourceSource will close and cause the connection to close. To avoid that you can concatenate Source.maybeSource.maybe() to the finite stream:

Scala

copysource
// using emit "one" and "two" and then keep the connection open
val flow: Flow[Message, Message, Promise[Option[Message]]] =
  Flow.fromSinkAndSourceMat(
    Sink.foreach[Message](println),
    Source(List(TextMessage("one"), TextMessage("two")))
      .concatMat(Source.maybe[Message])(Keep.right))(Keep.right)

val (upgradeResponse, promise) =
  Http().singleWebSocketRequest(
    WebSocketRequest("ws://example.com:8080/some/path"),
    flow)

// at some later time we want to disconnect
promise.success(None)

Java

copysource
// emit "one" and then "two" and then keep the source from completing
final Source<Message, CompletableFuture<Optional<Message>>> source =
  Source.from(Arrays.<Message>asList(TextMessage.create("one"), TextMessage.create("two")))
    .concatMat(Source.maybe(), Keep.right());

final Flow<Message, Message, CompletableFuture<Optional<Message>>> flow =
  Flow.fromSinkAndSourceMat(
    Sink.foreach(System.out::println),
    source,
    Keep.right());

final Pair<CompletionStage<WebSocketUpgradeResponse>, CompletableFuture<Optional<Message>>> pair =
  http.singleWebSocketRequest(
    WebSocketRequest.create("ws://example.com:8080/some/path"),
    flow,
    materializer);

// at some later time we want to disconnect
pair.second().complete(Optional.empty());

Scenarios that exist with the two streams in a WebSocket and possible ways to deal with it:

Automatic keep-alive Ping support

Similar to the server-side kee-alive Ping support, it is possible to configure the client-side to perform automatic keep-alive using Ping (or Pong) frames.

This is supported in a transparent way via configuration by setting the: akka.http.client.websocket.periodic-keep-alive-max-idle = 1 second to a specified max idle timeout. The keep-alive triggers when no other messages are in-flight during the such configured period. Akka HTTP will then automatically send a Ping frame for each of such idle intervals.

By default, the automatic keep-alive feature is disabled.

Custom keep-alive data payloads

By default, pings do not carry any payload, as it is often enough to simply push any frame over the connection to ensure the connection stays healthy (or detect if it was severed), however you may configure them to carry a custom payload, to do this you can provide a function that will be asked to emit the payload for each of the ping messages generated:

Scala

copysourceval defaultSettings = ClientConnectionSettings(system)

val pingCounter = new AtomicInteger()
val customWebsocketSettings =
  defaultSettings.websocketSettings
    .withPeriodicKeepAliveData(() => ByteString(s"debug-${pingCounter.incrementAndGet()}"))

val customSettings =
  defaultSettings.withWebsocketSettings(customWebsocketSettings)

val request = WebSocketRequest("ws://127.0.0.1")

Http().singleWebSocketRequest(
  request,
  Flow[Message],
  Http().defaultClientHttpsContext,
  None,
  customSettings,
  system.log
)

Java

copysourceClientConnectionSettings defaultSettings = ClientConnectionSettings.create(system);

AtomicInteger pingCounter = new AtomicInteger();

WebSocketSettings customWebsocketSettings = defaultSettings.getWebsocketSettings()
    .withPeriodicKeepAliveData(() ->
        ByteString.fromString(String.format("debug-%d", pingCounter.incrementAndGet()))
    );

ClientConnectionSettings customSettings =
    defaultSettings.withWebsocketSettings(customWebsocketSettings);

Http http = Http.get(system);
http.singleWebSocketRequest(
    WebSocketRequest.create("ws://127.0.0.1"),
    clientFlow,
    ConnectionContext.noEncryption(),
    Optional.empty(),
    customSettings,
    system.log(),
    materializer
);

Uni-directional Pong keep-alive

A Ping response will always be replied to by the client-side with an appropriate Pong reply, carrying the same payload. It is also possible to configure the keep-alive mechanism to send Pong frames instead of Ping frames, which enables an uni-directional heartbeat mechanism (in which case the client side will not reply to such heartbeat). You can configure this mode by setting: akka.http.client.websocket.periodic-keep-alive-mode = pong.