java.lang.Object
- akka.io.TcpMessage

public class TcpMessage
extends java.lang.Object

Constructor Summary

Constructors
Constructor Description

TcpMessage()

Method Summary

All Methods Static Methods Concrete Methods
Modifier and Type	Method	Description
`static Tcp.Command`	`abort()`	An abort operation will not flush pending writes and will issue a TCP ABORT command to the O/S kernel which should result in a TCP_RST packet being sent to the peer.
`static Tcp.Command`	`bind(ActorRef handler, java.net.InetSocketAddress endpoint, int backlog)`	Open a listening socket without specifying options.
`static Tcp.Command`	`bind(ActorRef handler, java.net.InetSocketAddress endpoint, int backlog, java.lang.Iterable<Inet.SocketOption> options, boolean pullMode)`	The Bind message is send to the TCP manager actor, which is obtained via `TcpExt.getManager()` in order to bind to a listening socket.
`static Tcp.Command`	`close()`	A normal close operation will first flush pending writes and then close the socket.
`static Tcp.Command`	`confirmedClose()`	A confirmed close operation will flush pending writes and half-close the connection, waiting for the peer to close the other half.
`static Tcp.Command`	`connect(java.net.InetSocketAddress remoteAddress)`	Connect to the given `remoteAddress` without binding to a local address and without specifying options.
`static Tcp.Command`	`connect(java.net.InetSocketAddress remoteAddress, java.net.InetSocketAddress localAddress, java.lang.Iterable<Inet.SocketOption> options, java.time.Duration timeout, boolean pullMode)`	The Connect message is sent to the TCP manager actor, which is obtained via `TcpExt.getManager()`.
`static Tcp.Command`	`connect(java.net.InetSocketAddress remoteAddress, java.net.InetSocketAddress localAddress, java.lang.Iterable<Inet.SocketOption> options, scala.concurrent.duration.FiniteDuration timeout, boolean pullMode)`	The Connect message is sent to the TCP manager actor, which is obtained via `TcpExt.getManager()`.
`static Tcp.NoAck`	`noAck()`	Default `Tcp.NoAck` instance which is used when no acknowledgment information is explicitly provided.
`static Tcp.NoAck`	`noAck(java.lang.Object token)`	Each `Tcp.WriteCommand` can optionally request a positive acknowledgment to be sent to the commanding actor.
`static Tcp.Command`	`register(ActorRef handler)`	The same as `register(handler, false, false)`.
`static Tcp.Command`	`register(ActorRef handler, boolean keepOpenOnPeerClosed, boolean useResumeWriting)`	This message must be sent to a TCP connection actor after receiving the `Tcp.Connected` message.
`static Tcp.Command`	`resumeAccepting(int batchSize)`	This message enables the accepting of the next connection if pull reading is enabled for connection actors.
`static Tcp.Command`	`resumeReading()`	This command needs to be sent to the connection actor after a `Tcp.SuspendReading` command in order to resume reading from the socket.
`static Tcp.Command`	`resumeWriting()`	When `useResumeWriting` is in effect as was indicated in the `Tcp.Register` message then this command needs to be sent to the connection actor in order to re-enable writing after a `Tcp.CommandFailed` event.
`static Tcp.Command`	`suspendReading()`	Sending this command to the connection actor will disable reading from the TCP socket.
`static Tcp.Command`	`unbind()`	In order to close down a listening socket, send this message to that socket’s actor (that is the actor which previously had sent the `Tcp.Bound` message).
`static Tcp.Command`	`write(ByteString data)`	The same as `write(data, noAck())`.
`static Tcp.Command`	`write(ByteString data, Tcp.Event ack)`	Write data to the TCP connection.
`static Tcp.Command`	`writeFile(java.lang.String filePath, long position, long count, Tcp.Event ack)`	Write `count` bytes starting at `position` from file at `filePath` to the connection.
`static Tcp.Command`	`writePath(java.nio.file.Path filePath, long position, long count, Tcp.Event ack)`	Write `count` bytes starting at `position` from file at `filePath` to the connection.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - TcpMessage
```
public TcpMessage()
```
- Method Detail
  - connect
```
public static Tcp.Command connect(java.net.InetSocketAddress remoteAddress,
                                  java.net.InetSocketAddress localAddress,
                                  java.lang.Iterable<Inet.SocketOption> options,
                                  scala.concurrent.duration.FiniteDuration timeout,
                                  boolean pullMode)
```
    The Connect message is sent to the TCP manager actor, which is obtained via TcpExt.getManager(). Either the manager replies with a Tcp.CommandFailed or the actor handling the new connection replies with a Tcp.Connected message.
    
    Parameters:
    
    remoteAddress - is the address to connect to
    
    localAddress - optionally specifies a specific address to bind to
    
    options - Please refer to TcpSO for a list of all supported options.
    
    timeout - is the desired connection timeout, null means "no timeout"
    
    pullMode - enables pull based reading from the connection
  - connect
```
public static Tcp.Command connect(java.net.InetSocketAddress remoteAddress,
                                  java.net.InetSocketAddress localAddress,
                                  java.lang.Iterable<Inet.SocketOption> options,
                                  java.time.Duration timeout,
                                  boolean pullMode)
```
    The Connect message is sent to the TCP manager actor, which is obtained via TcpExt.getManager(). Either the manager replies with a Tcp.CommandFailed or the actor handling the new connection replies with a Tcp.Connected message.
    
    Parameters:
    
    remoteAddress - is the address to connect to
    
    localAddress - optionally specifies a specific address to bind to
    
    options - Please refer to TcpSO for a list of all supported options.
    
    timeout - is the desired connection timeout, null means "no timeout"
    
    pullMode - enables pull based reading from the connection
  - connect
```
public static Tcp.Command connect(java.net.InetSocketAddress remoteAddress)
```
    Connect to the given remoteAddress without binding to a local address and without specifying options.
  - bind
```
public static Tcp.Command bind(ActorRef handler,
                               java.net.InetSocketAddress endpoint,
                               int backlog,
                               java.lang.Iterable<Inet.SocketOption> options,
                               boolean pullMode)
```
    The Bind message is send to the TCP manager actor, which is obtained via TcpExt.getManager() in order to bind to a listening socket. The manager replies either with a Tcp.CommandFailed or the actor handling the listen socket replies with a Tcp.Bound message. If the local port is set to 0 in the Bind message, then the Tcp.Bound message should be inspected to find the actual port which was bound to.
    
    Parameters:
    
    handler - The actor which will receive all incoming connection requests in the form of Tcp.Connected messages.
    
    endpoint - The socket address to bind to; use port zero for automatic assignment (i.e. an ephemeral port, see Tcp.Bound)
    
    backlog - This specifies the number of unaccepted connections the O/S kernel will hold for this port before refusing connections.
    
    options - Please refer to TcpSO for a list of all supported options.
    
    pullMode - enables pull based accepting and of connections and pull based reading from the accepted connections.
  - bind
```
public static Tcp.Command bind(ActorRef handler,
                               java.net.InetSocketAddress endpoint,
                               int backlog)
```
    Open a listening socket without specifying options.
  - register
```
public static Tcp.Command register(ActorRef handler,
                                   boolean keepOpenOnPeerClosed,
                                   boolean useResumeWriting)
```
    This message must be sent to a TCP connection actor after receiving the Tcp.Connected message. The connection will not read any data from the socket until this message is received, because this message defines the actor which will receive all inbound data.
    
    Parameters:
    
    handler - The actor which will receive all incoming data and which will be informed when the connection is closed.
    
    keepOpenOnPeerClosed - If this is set to true then the connection is not automatically closed when the peer closes its half, requiring an explicit Tcp.ConnectionClosed from our side when finished.
    
    useResumeWriting - If this is set to true then the connection actor will refuse all further writes after issuing a Tcp.CommandFailed notification until Tcp ResumeWriting is received. This can be used to implement NACK-based write backpressure.
  - register
```
public static Tcp.Command register(ActorRef handler)
```
    The same as register(handler, false, false).
  - unbind
```
public static Tcp.Command unbind()
```
    In order to close down a listening socket, send this message to that socket’s actor (that is the actor which previously had sent the Tcp.Bound message). The listener socket actor will reply with a Tcp.Unbound message.
  - close
```
public static Tcp.Command close()
```
    A normal close operation will first flush pending writes and then close the socket. The sender of this command and the registered handler for incoming data will both be notified once the socket is closed using a Tcp.Closed message.
  - confirmedClose
```
public static Tcp.Command confirmedClose()
```
    A confirmed close operation will flush pending writes and half-close the connection, waiting for the peer to close the other half. The sender of this command and the registered handler for incoming data will both be notified once the socket is closed using a Tcp.ConfirmedClosed message.
  - abort
```
public static Tcp.Command abort()
```
    An abort operation will not flush pending writes and will issue a TCP ABORT command to the O/S kernel which should result in a TCP_RST packet being sent to the peer. The sender of this command and the registered handler for incoming data will both be notified once the socket is closed using a Tcp.Aborted message.
  - noAck
```
public static Tcp.NoAck noAck(java.lang.Object token)
```
    Each Tcp.WriteCommand can optionally request a positive acknowledgment to be sent to the commanding actor. If such notification is not desired the Tcp.SimpleWriteCommand.ack() must be set to an instance of this class. The token contained within can be used to recognize which write failed when receiving a Tcp.CommandFailed message.
  - noAck
```
public static Tcp.NoAck noAck()
```
    Default Tcp.NoAck instance which is used when no acknowledgment information is explicitly provided. Its “token” is null.
  - write
```
public static Tcp.Command write(ByteString data,
                                Tcp.Event ack)
```
    Write data to the TCP connection. If no ack is needed use the special NoAck object. The connection actor will reply with a Tcp.CommandFailed message if the write could not be enqueued. If Tcp.SimpleWriteCommand.wantsAck() returns true, the connection actor will reply with the supplied Tcp.SimpleWriteCommand.ack() token once the write has been successfully enqueued to the O/S kernel. Note that this does not in any way guarantee that the data will be or have been sent! Unfortunately there is no way to determine whether a particular write has been sent by the O/S.
  - write
```
public static Tcp.Command write(ByteString data)
```
    The same as write(data, noAck()).
  - writeFile
```
public static Tcp.Command writeFile(java.lang.String filePath,
                                    long position,
                                    long count,
                                    Tcp.Event ack)
```
    Write count bytes starting at position from file at filePath to the connection. The count must be > 0. The connection actor will reply with a Tcp.CommandFailed message if the write could not be enqueued. If Tcp.SimpleWriteCommand.wantsAck() returns true, the connection actor will reply with the supplied Tcp.SimpleWriteCommand.ack() token once the write has been successfully enqueued to the O/S kernel. Note that this does not in any way guarantee that the data will be or have been sent! Unfortunately there is no way to determine whether a particular write has been sent by the O/S.
  - writePath
```
public static Tcp.Command writePath(java.nio.file.Path filePath,
                                    long position,
                                    long count,
                                    Tcp.Event ack)
```
    Write count bytes starting at position from file at filePath to the connection. The count must be > 0. The connection actor will reply with a Tcp.CommandFailed message if the write could not be enqueued. If Tcp.SimpleWriteCommand.wantsAck() returns true, the connection actor will reply with the supplied Tcp.SimpleWriteCommand.ack() token once the write has been successfully enqueued to the O/S kernel. Note that this does not in any way guarantee that the data will be or have been sent! Unfortunately there is no way to determine whether a particular write has been sent by the O/S.
  - resumeWriting
```
public static Tcp.Command resumeWriting()
```
    When useResumeWriting is in effect as was indicated in the Tcp.Register message then this command needs to be sent to the connection actor in order to re-enable writing after a Tcp.CommandFailed event. All Tcp.WriteCommand processed by the connection actor between the first Tcp.CommandFailed and subsequent reception of this message will also be rejected with Tcp.CommandFailed.
  - suspendReading
```
public static Tcp.Command suspendReading()
```
    Sending this command to the connection actor will disable reading from the TCP socket. TCP flow-control will then propagate backpressure to the sender side as buffers fill up on either end. To re-enable reading send Tcp.ResumeReading.
  - resumeReading
```
public static Tcp.Command resumeReading()
```
    This command needs to be sent to the connection actor after a Tcp.SuspendReading command in order to resume reading from the socket.
  - resumeAccepting
```
public static Tcp.Command resumeAccepting(int batchSize)
```
    This message enables the accepting of the next connection if pull reading is enabled for connection actors.
    
    Parameters:
    
    batchSize - The number of connections to accept before waiting for the next resume command

Class TcpMessage

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

TcpMessage

Method Detail

connect

connect

connect

bind

bind

register

register

unbind

close

confirmedClose

abort

noAck

noAck

write

write

writeFile

writePath

resumeWriting

suspendReading

resumeReading

resumeAccepting