Low-Level Server-Side API

Low-Level Server-Side API

Apart from the HTTP Client Akka HTTP also provides an embedded, Reactive-Streams-based, fully asynchronous HTTP/1.1 server implemented on top of Akka Stream.

It sports the following features:

  • Full support for HTTP persistent connections
  • Full support for HTTP pipelining
  • Full support for asynchronous HTTP streaming including "chunked" transfer encoding accessible through an idiomatic API
  • Optional SSL/TLS encryption
  • WebSocket support

The server-side components of Akka HTTP are split into two layers:

  1. The basic low-level server implementation in the akka-http-core module
  2. Higher-level functionality in the akka-http module

The low-level server (1) is scoped with a clear focus on the essential functionality of an HTTP/1.1 server:

  • Connection management
  • Parsing and rendering of messages and headers
  • Timeout management (for requests and connections)
  • Response ordering (for transparent pipelining support)

All non-core features of typical HTTP servers (like request routing, file serving, compression, etc.) are left to the higher layers, they are not implemented by the akka-http-core-level server itself. Apart from general focus this design keeps the server core small and light-weight as well as easy to understand and maintain.

Depending on your needs you can either use the low-level API directly or rely on the high-level Routing DSL which can make the definition of more complex service logic much easier.

Streams and HTTP

The Akka HTTP server is implemented on top of Akka Stream and makes heavy use of it - in its implementation as well as on all levels of its API.

On the connection level Akka HTTP offers basically the same kind of interface as Akka Stream IO: A socket binding is represented as a stream of incoming connections. The application pulls connections from this stream source and, for each of them, provides a Flow[HttpRequest, HttpResponse, _] to "translate" requests into responses.

Apart from regarding a socket bound on the server-side as a Source[IncomingConnection] and each connection as a Source[HttpRequest] with a Sink[HttpResponse] the stream abstraction is also present inside a single HTTP message: The entities of HTTP requests and responses are generally modeled as a Source[ByteString]. See also the HTTP Model for more information on how HTTP messages are represented in Akka HTTP.

Starting and Stopping

On the most basic level an Akka HTTP server is bound by invoking the bind method of the akka.http.scaladsl.Http extension:

import akka.actor.ActorSystem
import akka.http.scaladsl.Http
import akka.stream.ActorMaterializer
import akka.stream.scaladsl._

implicit val system = ActorSystem()
implicit val materializer = ActorMaterializer()
implicit val executionContext = system.dispatcher

val serverSource: Source[Http.IncomingConnection, Future[Http.ServerBinding]] =
  Http().bind(interface = "localhost", port = 8080)
val bindingFuture: Future[Http.ServerBinding] =
  serverSource.to(Sink.foreach { connection => // foreach materializes the source
    println("Accepted new connection from " + connection.remoteAddress)
    // ... and then actually handle the connection

Arguments to the Http().bind method specify the interface and port to bind to and register interest in handling incoming HTTP connections. Additionally, the method also allows for the definition of socket options as well as a larger number of settings for configuring the server according to your needs.

The result of the bind method is a Source[Http.IncomingConnection] which must be drained by the application in order to accept incoming connections. The actual binding is not performed before this source is materialized as part of a processing pipeline. In case the bind fails (e.g. because the port is already busy) the materialized stream will immediately be terminated with a respective exception. The binding is released (i.e. the underlying socket unbound) when the subscriber of the incoming connection source has cancelled its subscription. Alternatively one can use the unbind() method of the Http.ServerBinding instance that is created as part of the connection source's materialization process. The Http.ServerBinding also provides a way to get a hold of the actual local address of the bound socket, which is useful for example when binding to port zero (and thus letting the OS pick an available port).

Request-Response Cycle

When a new connection has been accepted it will be published as an Http.IncomingConnection which consists of the remote address and methods to provide a Flow[HttpRequest, HttpResponse, _] to handle requests coming in over this connection.

Requests are handled by calling one of the handleWithXXX methods with a handler, which can either be

  • a Flow[HttpRequest, HttpResponse, _] for handleWith,
  • a function HttpRequest => HttpResponse for handleWithSyncHandler,
  • a function HttpRequest => Future[HttpResponse] for handleWithAsyncHandler.

Here is a complete example:

import akka.actor.ActorSystem
import akka.http.scaladsl.Http
import akka.http.scaladsl.model.HttpMethods._
import akka.http.scaladsl.model._
import akka.stream.ActorMaterializer
import akka.stream.scaladsl.Sink

implicit val system = ActorSystem()
implicit val materializer = ActorMaterializer()
implicit val executionContext = system.dispatcher

val serverSource = Http().bind(interface = "localhost", port = 8080)

val requestHandler: HttpRequest => HttpResponse = {
  case HttpRequest(GET, Uri.Path("/"), _, _, _) =>
    HttpResponse(entity = HttpEntity(ContentTypes.`text/html(UTF-8)`,
      "<html><body>Hello world!</body></html>"))

  case HttpRequest(GET, Uri.Path("/ping"), _, _, _) =>
    HttpResponse(entity = "PONG!")

  case HttpRequest(GET, Uri.Path("/crash"), _, _, _) =>

  case _: HttpRequest =>
    HttpResponse(404, entity = "Unknown resource!")

val bindingFuture: Future[Http.ServerBinding] =
  serverSource.to(Sink.foreach { connection =>
    println("Accepted new connection from " + connection.remoteAddress)

    connection handleWithSyncHandler requestHandler
    // this is equivalent to
    // connection handleWith { Flow[HttpRequest] map requestHandler }

In this example, a request is handled by transforming the request stream with a function HttpRequest => HttpResponse using handleWithSyncHandler (or equivalently, Akka Stream's map operator). Depending on the use case many other ways of providing a request handler are conceivable using Akka Stream's combinators.

If the application provides a Flow it is also the responsibility of the application to generate exactly one response for every request and that the ordering of responses matches the ordering of the associated requests (which is relevant if HTTP pipelining is enabled where processing of multiple incoming requests may overlap). When relying on handleWithSyncHandler or handleWithAsyncHandler, or the map or mapAsync stream operators, this requirement will be automatically fulfilled.

Streaming Request/Response Entities

Streaming of HTTP message entities is supported through subclasses of HttpEntity. The application needs to be able to deal with streamed entities when receiving a request as well as, in many cases, when constructing responses. See HttpEntity for a description of the alternatives.

If you rely on the Marshalling and/or Unmarshalling facilities provided by Akka HTTP then the conversion of custom types to and from streamed entities can be quite convenient.

Closing a connection

The HTTP connection will be closed when the handling Flow cancels its upstream subscription or the peer closes the connection. An often times more convenient alternative is to explicitly add a Connection: close header to an HttpResponse. This response will then be the last one on the connection and the server will actively close the connection when it has been sent out.

Connection will also be closed if request entity has been cancelled (e.g. by attaching it to Sink.cancelled) or consumed only partially (e.g. by using take combinator). In order to prevent this behaviour entity should be explicitly drained by attaching it to Sink.ignore.

Configuring Server-side HTTPS

For detailed documentation about configuring and using HTTPS on the server-side refer to Server-Side HTTPS Support.

Stand-Alone HTTP Layer Usage

Due to its Reactive-Streams-based nature the Akka HTTP layer is fully detachable from the underlying TCP interface. While in most applications this "feature" will not be crucial it can be useful in certain cases to be able to "run" the HTTP layer (and, potentially, higher-layers) against data that do not come from the network but rather some other source. Potential scenarios where this might be useful include tests, debugging or low-level event-sourcing (e.g by replaying network traffic).

On the server-side the stand-alone HTTP layer forms a BidiFlow that is defined like this:

 * The type of the server-side HTTP layer as a stand-alone BidiFlow
 * that can be put atop the TCP layer to form an HTTP server.
 * {{{
 *                +------+
 * HttpResponse ~>|      |~> SslTlsOutbound
 *                | bidi |
 * HttpRequest  <~|      |<~ SslTlsInbound
 *                +------+
 * }}}
type ServerLayer = BidiFlow[HttpResponse, SslTlsOutbound, SslTlsInbound, HttpRequest, NotUsed]

You create an instance of Http.ServerLayer by calling one of the two overloads of the Http().serverLayer method, which also allows for varying degrees of configuration.

Controlling server parallelism

Request handling can be parallelized on two axes, by handling several connections in parallel and by relying on HTTP pipelining to send several requests on one connection without waiting for a response first. In both cases the client controls the number of ongoing requests. To prevent being overloaded by too many requests, Akka HTTP can limit the number of requests it handles in parallel.

To limit the number of simultaneously open connections, use the akka.http.server.max-connections setting. This setting applies to all of Http.bindAndHandle* methods. If you use Http.bind, incoming connections are represented by a Source[IncomingConnection, ...]. Use Akka Stream's combinators to apply backpressure to control the flow of incoming connections, e.g. by using throttle or mapAsync.

HTTP pipelining is generally discouraged (and disabled by most browsers) but is nevertheless fully supported in Akka HTTP. The limit is applied on two levels. First, there's the akka.http.server.pipeline-limit config setting which prevents that more than the given number of outstanding requests is ever given to the user-supplied handler-flow. On the other hand, the handler flow itself can apply any kind of throttling itself. If you use one of the Http.bindAndHandleSync or Http.bindAndHandleAsync entry-points, you can specify the parallelism argument (default = 1, i.e. pipelining disabled) to control the number of concurrent requests per connection. If you use Http.bindAndHandle or Http.bind, the user-supplied handler flow has full control over how many request it accepts simultaneously by applying backpressure. In this case, you can e.g. use Akka Stream's mapAsync combinator with a given parallelism to limit the number of concurrently handled requests. Effectively, the more constraining one of these two measures, config setting and manual flow shaping, will determine how parallel requests on one connection are handled.

Handling HTTP Server failures in the Low-Level API

There are various situations when failure may occur while initialising or running an Akka HTTP server. Akka by default will log all these failures, however sometimes one may want to react to failures in addition to them just being logged, for example by shutting down the actor system, or notifying some external monitoring end-point explicitly.

There are multiple things that can fail when creating and materializing an HTTP Server (similarily, the same applied to a plain streaming Tcp() server). The types of failures that can happen on different layers of the stack, starting from being unable to start the server, and ending with failing to unmarshal an HttpRequest, examples of failures include (from outer-most, to inner-most):

  • Failure to bind to the specified address/port,
  • Failure while accepting new IncommingConnection s, for example when the OS has run out of file descriptors or memory,
  • Failure while handling a connection, for example if the incoming HttpRequest is malformed.

This section describes how to handle each failure situation, and in which situations these failures may occur.

The first type of failure is when the server is unable to bind to the given port. For example when the port is already taken by another application, or if the port is privileged (i.e. only usable by root). In this case the "binding future" will fail immediatly, and we can react to if by listening on the Future's completion:

implicit val system = ActorSystem()
implicit val materializer = ActorMaterializer()
// needed for the future onFailure in the end
implicit val executionContext = system.dispatcher

// let's say the OS won't allow us to bind to 80.
val (host, port) = ("localhost", 80)
val serverSource = Http().bind(host, port)

val bindingFuture: Future[ServerBinding] = serverSource
  .to(handleConnections) // Sink[Http.IncomingConnection, _]

bindingFuture.onFailure {
  case ex: Exception =>
    log.error(ex, "Failed to bind to {}:{}!", host, port)

Once the server has successfully bound to a port, the Source[IncomingConnection, _] starts running and emiting new incoming connections. This source technically can signal a failure as well, however this should only happen in very dramantic situations such as running out of file descriptors or memory available to the system, such that it's not able to accept a new incoming connection. Handling failures in Akka Streams is pretty stright forward, as failures are signaled through the stream starting from the stage which failed, all the way downstream to the final stages.

In the example below we add a custom GraphStage (see Custom stream processing) in order to react to the stream's failure. We signal a failureMonitor actor with the cause why the stream is going down, and let the Actor handle the rest – maybe it'll decide to restart the server or shutdown the ActorSystem, that however is not our concern anymore.

import akka.actor.ActorSystem
import akka.actor.ActorRef
import akka.http.scaladsl.Http
import akka.http.scaladsl.model.HttpEntity
import akka.http.scaladsl.model.ContentTypes
import akka.http.scaladsl.server.Directives._
import akka.stream.ActorMaterializer
import scala.io.StdIn

implicit val system = ActorSystem()
implicit val materializer = ActorMaterializer()
implicit val executionContext = system.dispatcher

import Http._
val (host, port) = ("localhost", 8080)
val serverSource = Http().bind(host, port)

val failureMonitor: ActorRef = system.actorOf(MyExampleMonitoringActor.props)

val reactToTopLevelFailures = Flow[IncomingConnection]
  .watchTermination()((_, termination) => termination.onFailure {
    case cause => failureMonitor ! cause

  .to(handleConnections) // Sink[Http.IncomingConnection, _]

The third type of failure that can occur is when the connection has been properly established, however afterwards is terminated abruptly – for example by the client aborting the underlying TCP connection. To handle this failure we can use the same pattern as in the previous snippet, however apply it to the connection's Flow:

import akka.actor.ActorSystem
import akka.http.scaladsl.Http
import akka.http.scaladsl.model.{ ContentTypes, HttpEntity }
import akka.stream.ActorMaterializer

implicit val system = ActorSystem()
implicit val materializer = ActorMaterializer()
implicit val executionContext = system.dispatcher

val (host, port) = ("localhost", 8080)
val serverSource = Http().bind(host, port)

val reactToConnectionFailure = Flow[HttpRequest]
  .recover[HttpRequest] {
    case ex =>
      // handle the failure somehow
      throw ex

val httpEcho = Flow[HttpRequest]
  .map { request =>
    // simple text "echo" response:
    HttpResponse(entity = HttpEntity(ContentTypes.`text/plain(UTF-8)`, request.entity.dataBytes))

  .runForeach { con =>

These failures can be described more or less infrastructure related, they are failing bindings or connections. Most of the time you won't need to dive into those very deeply, as Akka will simply log errors of this kind anyway, which is a reasonable default for such problems.

In order to learn more about handling exceptions in the actual routing layer, which is where your application code comes into the picture, refer to Exception Handling which focuses explicitly on explaining how exceptions thrown in routes can be handled and transformed into HttpResponse s with apropriate error codes and human-readable failure descriptions.