Akka Thread Starvation Detector

The Akka Thread Starvation Detector is a diagnostic tool that monitors the dispatcher of an ActorSystem and will log a warning if the dispatcher becomes unresponsive.

The most common reason for an ActorSystem to become unresponsive is that blocking tasks are run on the dispatcher and other tasks cannot be executed in a timely fashion any more. This will lead to all kinds of problems because tasks (like handling an Actor’s mailbox or executing a Future callback) are usually expected to finish in very short time on a healthy ActorSystem. When thread starvation occurs, all threads of the dispatcher’s thread pool are blocking e.g. doing IO, delaying other work for indefinite periods of time. The symptoms of thread starvation are usually increased latency (despite low CPU usage), timeouts, or failing Akka Remote connections.

The Starvation Detector will periodically schedule a simple task to measure the scheduling and execution time of the dispatcher. If a threshold is exceeded, a warning is logged with stack traces that show what threads of the dispatcher are busy with.


This feature is included in a subscription to Lightbend Platform, which includes other technology enhancements, monitoring and telemetry, and one-to-one support from the expert engineers behind Akka.

Using the Starvation Detector

To use the Starvation Detector feature a dependency on the akka-diagnostics artifact must be added.

// Add Lightbend Platform to your build as documented at https://developer.lightbend.com/docs/lightbend-platform/introduction/getting-started/subscription-and-credentials.html
"com.lightbend.akka" %% "akka-diagnostics" % "1.1.16"
// Add Lightbend Platform to your build as documented at https://developer.lightbend.com/docs/lightbend-platform/introduction/getting-started/subscription-and-credentials.html
dependencies {
  compile group: 'com.lightbend.akka', name: 'akka-diagnostics_2.11', version: '1.1.16'
<!-- Add Lightbend Platform to your build as documented at https://developer.lightbend.com/docs/lightbend-platform/introduction/getting-started/subscription-and-credentials.html -->

Before you can access this library, you’ll need to configure the Lightbend repository and credentials in your build.

When this dependency is included the Starvation Detector is automatically run when the ActorSystem is started.

You can create starvation detectors for other execution contexts than the main Akka ActorSystem one as well. Use com.lightbend.akka.diagnostics.StarvationDetector.checkExecutionContext to create a starvation detector for any ExecutionContext (though, it will not include stack trace information if the ExecutionContext is not an Akka Dispatcher).


You can customize settings of the starvation detector to prevent spurious logging depending on your application logic.

# The starvation detector is a dedicated thread that schedules a task on the system's
# main dispatcher and checks if the execution time is less than the threshold. Exceeding the
# threshold is an indication for thread starvation. The starvation detector will log a warning
# in that case with statistics and stack traces of the dispatcher's threads.
akka.diagnostics.starvation-detector {
  # The interval to check task execution time on the dispatcher.
  # Set to 0 or "off" to disable checking.
  check-interval = 1s

  # The starvation detector only runs after the initial delay. The idea is that during startup,
  # initial tasks like class loading, warming up JIT and similar environment issues can decrease
  # the overall throughput. As this is usually a transient condition, checking will only run after
  # the configured time.
  # Set to 0 or "off" to run checking right from the start.
  initial-delay = 10s

  # The maximum time during which the dispatcher is expected to execute the starvation detection task.
  # If the dispatcher takes longer to execute the task, the dispatcher (and CPU or other infrastructure
  # that is needed to run tasks) is considered busy and a warning is logged.
  # The default value was chosen to be high enough to decrease the likelihood of false positives while
  # still being likely to show severe problems early.
  # For many applications (and also for internal Akka messaging) much smaller delays can already become
  # a problem. To detect smaller dispatcher related delays, decrease the value, but keep in mind the
  # higher chance of false positives.
  max-delay-warning-threshold = 100 ms

  # The minimum time between consecutive warnings.
  # When thread starvation is detected it is likely that it will last for a longer period of time.
  # This setting can be used to prevent that warnings from the starvation detector flood the logs.
  warning-interval = 10 seconds

By default, the starvation detector runs seldom enough not to cause any performance hit itself. Thread starvation issues usually affect systems for longer time spans, so the starvation detector is still likely to experience and warn even when it runs only infrequently.

Understanding The Log Output

Here’s an example warning (taken from our tests that simulate blocking calls using Thread.sleep):

[WARN] [04/24/2017 15:38:35.661] [Thread-217] [StarvationDetector(akka://StarvationDetectorSpec)] Exceedingly long scheduling
time on ExecutionContext Dispatcher[akka.actor.default-dispatcher]. Starvation detector task was only executed after 714 ms which is
longer than the warning threshold of 100 milliseconds. This might be a sign of thread, CPU, or dispatcher starvation.
This can be caused by blocking calls, CPU overload, GC, or overlong work units. See the below information for hints
about what could be the cause. Next warning will be shown in 10000 milliseconds.

Thread states (total 2 thread):   2 TIMED_WAITING
Top stacks:
  2 java.lang.Thread.sleep(Native Method)

The logging message gives this information:

  • Scheduling time for the starvation detector task (714 milliseconds)
  • Some general hints what could be the reason for the delay
  • Thread state statistics (TIMED_WAITING which is the state Thread.sleep puts a thread in)
  • A histogram of stack traces for all threads of this dispatcher ordered by the most frequent stack trace first (in this case all of the 2 threads of the dispatcher were blocking in Thread.sleep with the same strack trace). The shown stack traces show the state of threads when the threshold was exceeded and are only a single sample of the state of the application when the condition occurred. The information should therefore be taken only as an indication of what could be wrong not as the final answer.

Many blocking IO tasks will block in native code which means that from the view of the JVM, the thread is in RUNNABLE state. Therefore, the thread state statistics will only give a hint at what is going on but the stack traces will usually give more useful information.

Solving Thread Starvation Issues

See Blocking Needs Careful Management in the Akka reference documentation. The Akka-Http documentation also has a page on “Handling blocking operations” that applies generally to all Akka applications.