trait StreamingPullRequestOrBuilder extends MessageOrBuilder
Ordering
- Alphabetic
- By Inheritance
Inherited
- StreamingPullRequestOrBuilder
- MessageOrBuilder
- MessageLiteOrBuilder
- AnyRef
- Any
- Hide All
- Show All
Visibility
- Public
- All
Abstract Value Members
-
abstract
def
findInitializationErrors(): List[String]
- Definition Classes
- MessageOrBuilder
-
abstract
def
getAckIds(index: Int): String
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
repeated string ack_ids = 2;
-
abstract
def
getAckIdsBytes(index: Int): ByteString
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
repeated string ack_ids = 2;
-
abstract
def
getAckIdsCount(): Int
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
repeated string ack_ids = 2;
-
abstract
def
getAckIdsList(): List[String]
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
List of acknowledgement IDs for acknowledging previously received messages (received on this stream or a different stream). If an ack ID has expired, the corresponding message may be redelivered later. Acknowledging a message more than once will not result in an error. If the acknowledgement ID is malformed, the stream will be aborted with status `INVALID_ARGUMENT`.
repeated string ack_ids = 2;
-
abstract
def
getAllFields(): Map[FieldDescriptor, AnyRef]
- Definition Classes
- MessageOrBuilder
-
abstract
def
getDefaultInstanceForType(): Message
- Definition Classes
- MessageOrBuilder → MessageLiteOrBuilder
-
abstract
def
getDescriptorForType(): Descriptor
- Definition Classes
- MessageOrBuilder
-
abstract
def
getField(arg0: FieldDescriptor): AnyRef
- Definition Classes
- MessageOrBuilder
-
abstract
def
getInitializationErrorString(): String
- Definition Classes
- MessageOrBuilder
-
abstract
def
getModifyDeadlineAckIds(index: Int): String
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
repeated string modify_deadline_ack_ids = 4;
-
abstract
def
getModifyDeadlineAckIdsBytes(index: Int): ByteString
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
repeated string modify_deadline_ack_ids = 4;
-
abstract
def
getModifyDeadlineAckIdsCount(): Int
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
repeated string modify_deadline_ack_ids = 4;
-
abstract
def
getModifyDeadlineAckIdsList(): List[String]
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
List of acknowledgement IDs whose deadline will be modified based on the corresponding element in `modify_deadline_seconds`. This field can be used to indicate that more time is needed to process a message by the subscriber, or to make the message available for redelivery if the processing was interrupted.
repeated string modify_deadline_ack_ids = 4;
-
abstract
def
getModifyDeadlineSeconds(index: Int): Int
The list of new ack deadlines for the IDs listed in `modify_deadline_ack_ids`. The size of this list must be the same as the size of `modify_deadline_ack_ids`. If it differs the stream will be aborted with `INVALID_ARGUMENT`. Each element in this list is applied to the element in the same position in `modify_deadline_ack_ids`. The new ack deadline is with respect to the time this request was sent to the Pub/Sub system. Must be >= 0. For example, if the value is 10, the new ack deadline will expire 10 seconds after this request is received. If the value is 0, the message is immediately made available for another streaming or non-streaming pull request. If the value is < 0 (an error), the stream will be aborted with status `INVALID_ARGUMENT`.
The list of new ack deadlines for the IDs listed in `modify_deadline_ack_ids`. The size of this list must be the same as the size of `modify_deadline_ack_ids`. If it differs the stream will be aborted with `INVALID_ARGUMENT`. Each element in this list is applied to the element in the same position in `modify_deadline_ack_ids`. The new ack deadline is with respect to the time this request was sent to the Pub/Sub system. Must be >= 0. For example, if the value is 10, the new ack deadline will expire 10 seconds after this request is received. If the value is 0, the message is immediately made available for another streaming or non-streaming pull request. If the value is < 0 (an error), the stream will be aborted with status `INVALID_ARGUMENT`.
repeated int32 modify_deadline_seconds = 3;
-
abstract
def
getModifyDeadlineSecondsCount(): Int
The list of new ack deadlines for the IDs listed in `modify_deadline_ack_ids`. The size of this list must be the same as the size of `modify_deadline_ack_ids`. If it differs the stream will be aborted with `INVALID_ARGUMENT`. Each element in this list is applied to the element in the same position in `modify_deadline_ack_ids`. The new ack deadline is with respect to the time this request was sent to the Pub/Sub system. Must be >= 0. For example, if the value is 10, the new ack deadline will expire 10 seconds after this request is received. If the value is 0, the message is immediately made available for another streaming or non-streaming pull request. If the value is < 0 (an error), the stream will be aborted with status `INVALID_ARGUMENT`.
The list of new ack deadlines for the IDs listed in `modify_deadline_ack_ids`. The size of this list must be the same as the size of `modify_deadline_ack_ids`. If it differs the stream will be aborted with `INVALID_ARGUMENT`. Each element in this list is applied to the element in the same position in `modify_deadline_ack_ids`. The new ack deadline is with respect to the time this request was sent to the Pub/Sub system. Must be >= 0. For example, if the value is 10, the new ack deadline will expire 10 seconds after this request is received. If the value is 0, the message is immediately made available for another streaming or non-streaming pull request. If the value is < 0 (an error), the stream will be aborted with status `INVALID_ARGUMENT`.
repeated int32 modify_deadline_seconds = 3;
-
abstract
def
getModifyDeadlineSecondsList(): List[Integer]
The list of new ack deadlines for the IDs listed in `modify_deadline_ack_ids`. The size of this list must be the same as the size of `modify_deadline_ack_ids`. If it differs the stream will be aborted with `INVALID_ARGUMENT`. Each element in this list is applied to the element in the same position in `modify_deadline_ack_ids`. The new ack deadline is with respect to the time this request was sent to the Pub/Sub system. Must be >= 0. For example, if the value is 10, the new ack deadline will expire 10 seconds after this request is received. If the value is 0, the message is immediately made available for another streaming or non-streaming pull request. If the value is < 0 (an error), the stream will be aborted with status `INVALID_ARGUMENT`.
The list of new ack deadlines for the IDs listed in `modify_deadline_ack_ids`. The size of this list must be the same as the size of `modify_deadline_ack_ids`. If it differs the stream will be aborted with `INVALID_ARGUMENT`. Each element in this list is applied to the element in the same position in `modify_deadline_ack_ids`. The new ack deadline is with respect to the time this request was sent to the Pub/Sub system. Must be >= 0. For example, if the value is 10, the new ack deadline will expire 10 seconds after this request is received. If the value is 0, the message is immediately made available for another streaming or non-streaming pull request. If the value is < 0 (an error), the stream will be aborted with status `INVALID_ARGUMENT`.
repeated int32 modify_deadline_seconds = 3;
-
abstract
def
getOneofFieldDescriptor(arg0: OneofDescriptor): FieldDescriptor
- Definition Classes
- MessageOrBuilder
-
abstract
def
getRepeatedField(arg0: FieldDescriptor, arg1: Int): AnyRef
- Definition Classes
- MessageOrBuilder
-
abstract
def
getRepeatedFieldCount(arg0: FieldDescriptor): Int
- Definition Classes
- MessageOrBuilder
-
abstract
def
getStreamAckDeadlineSeconds(): Int
The ack deadline to use for the stream. This must be provided in the first request on the stream, but it can also be updated on subsequent requests from client to server. The minimum deadline you can specify is 10 seconds. The maximum deadline you can specify is 600 seconds (10 minutes).
The ack deadline to use for the stream. This must be provided in the first request on the stream, but it can also be updated on subsequent requests from client to server. The minimum deadline you can specify is 10 seconds. The maximum deadline you can specify is 600 seconds (10 minutes).
int32 stream_ack_deadline_seconds = 5;
-
abstract
def
getSubscription(): String
The subscription for which to initialize the new stream. This must be provided in the first request on the stream, and must not be set in subsequent requests from client to server. Format is `projects/{project}/subscriptions/{sub}`.
The subscription for which to initialize the new stream. This must be provided in the first request on the stream, and must not be set in subsequent requests from client to server. Format is `projects/{project}/subscriptions/{sub}`.
string subscription = 1;
-
abstract
def
getSubscriptionBytes(): ByteString
The subscription for which to initialize the new stream. This must be provided in the first request on the stream, and must not be set in subsequent requests from client to server. Format is `projects/{project}/subscriptions/{sub}`.
The subscription for which to initialize the new stream. This must be provided in the first request on the stream, and must not be set in subsequent requests from client to server. Format is `projects/{project}/subscriptions/{sub}`.
string subscription = 1;
-
abstract
def
getUnknownFields(): UnknownFieldSet
- Definition Classes
- MessageOrBuilder
-
abstract
def
hasField(arg0: FieldDescriptor): Boolean
- Definition Classes
- MessageOrBuilder
-
abstract
def
hasOneof(arg0: OneofDescriptor): Boolean
- Definition Classes
- MessageOrBuilder
-
abstract
def
isInitialized(): Boolean
- Definition Classes
- MessageLiteOrBuilder
Concrete Value Members
-
final
def
!=(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
final
def
##(): Int
- Definition Classes
- AnyRef → Any
-
final
def
==(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
final
def
asInstanceOf[T0]: T0
- Definition Classes
- Any
-
def
clone(): AnyRef
- Attributes
- protected[java.lang]
- Definition Classes
- AnyRef
- Annotations
- @native() @HotSpotIntrinsicCandidate() @throws( ... )
-
final
def
eq(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
-
def
equals(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
final
def
getClass(): Class[_]
- Definition Classes
- AnyRef → Any
- Annotations
- @native() @HotSpotIntrinsicCandidate()
-
def
hashCode(): Int
- Definition Classes
- AnyRef → Any
- Annotations
- @native() @HotSpotIntrinsicCandidate()
-
final
def
isInstanceOf[T0]: Boolean
- Definition Classes
- Any
-
final
def
ne(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
-
final
def
notify(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native() @HotSpotIntrinsicCandidate()
-
final
def
notifyAll(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native() @HotSpotIntrinsicCandidate()
-
final
def
synchronized[T0](arg0: ⇒ T0): T0
- Definition Classes
- AnyRef
-
def
toString(): String
- Definition Classes
- AnyRef → Any
-
final
def
wait(arg0: Long, arg1: Int): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws( ... )
-
final
def
wait(arg0: Long): Unit
- Definition Classes
- AnyRef
- Annotations
- @native() @throws( ... )
-
final
def
wait(): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws( ... )