Dispatcher which runs invocations on the current thread only.
Dispatcher which runs invocations on the current thread only. This dispatcher does not create any new threads, but it can be used from different threads concurrently for the same actor. The dispatch strategy is to run on the current thread unless the target actor is either suspendSwitch or already running on the current thread (if it is running on a different thread, then this thread will block until that other invocation is finished); if the invocation is not run, it is queued in a thread-local queue to be executed once the active invocation further up the call stack finishes. This leads to completely deterministic execution order if only one thread is used.
Suspending and resuming are global actions for one actor, meaning they can affect different threads, which leads to complications. If messages are queued (thread-locally) during the suspendSwitch period, the only thread to run them upon resume is the thread actually calling the resume method. Hence, all thread-local queues which are not currently being drained (possible, since suspend-queue-resume might happen entirely during an invocation on a different thread) are scooped up into the current thread-local queue which is then executed. It is possible to suspend an actor from within its call stack.
1.1
Custom event filter when the others do not fit the bill.
Custom event filter when the others do not fit the bill.
If the partial function is defined and returns true, filter the event.
Filter which matches DeadLetter events, if the wrapped message conforms to the given type.
Filter which matches Debug events, if they satisfy the given criteria:
Filter which matches Debug events, if they satisfy the given criteria:
source
, if given, applies a filter on the event’s originmessage
applies a filter on the event’s message (either with String.startsWith or Regex.findFirstIn().isDefined)If you want to match all Debug events, the most efficient is to use Left("")
.
Filter which matches Error events, if they satisfy the given criteria:
Filter which matches Error events, if they satisfy the given criteria:
throwable
applies an upper bound on the type of exception contained in the Error eventsource
, if given, applies a filter on the event’s originmessage
applies a filter on the event’s message (either
with String.startsWith or Regex.findFirstIn().isDefined); if the message
itself does not match, the match is retried with the contained Exception’s
message; if both are null
, the filter always matches if at
the same time the Exception’s stack trace is empty (this catches
JVM-omitted “fast-throw” exceptions)If you want to match all Error events, the most efficient is to use Left("")
.
Facilities for selectively filtering out expected events from logging so that you can keep your test run’s console output clean and do not miss real error messages.
Facilities for selectively filtering out expected events from logging so that you can keep your test run’s console output clean and do not miss real error messages.
See the companion object for convenient factory methods.
If the occurrences
is set to Int.MaxValue, no tracking is done.
Filter which matches Info events, if they satisfy the given criteria:
Filter which matches Info events, if they satisfy the given criteria:
source
, if given, applies a filter on the event’s originmessage
applies a filter on the event’s message (either with String.startsWith or Regex.findFirstIn().isDefined)If you want to match all Info events, the most efficient is to use Left("")
.
This special ActorRef is exclusively for use during unit testing in a single-threaded environment.
This special ActorRef is exclusively for use during unit testing in a single-threaded environment. Therefore, it overrides the dispatcher to CallingThreadDispatcher and sets the receiveTimeout to None. Otherwise, it acts just like a normal ActorRef. You may retrieve a reference to the underlying actor to test internal logic.
1.1
Scala API.
Scala API. Scale timeouts (durations) during tests with the configured
'akka.test.timefactor'.
Implicit class providing dilated
method.
import scala.concurrent.duration._ import akka.testkit._ 10.milliseconds.dilated
Corresponding Java API is available in JavaTestKit.dilated()
Implementation helpers of the EventFilter facilities: send Mute
to the TestEventListener to install a filter, and UnMute
to
deinstall it.
Implementation helpers of the EventFilter facilities: send Mute
to the TestEventListener to install a filter, and UnMute
to
deinstall it.
You should always prefer the filter methods in the package object
(see akka.testkit filterEvents
and filterException
) or on the
EventFilter implementations.
EventListener for running tests, which allows selectively filtering out expected messages.
EventListener for running tests, which allows selectively filtering out
expected messages. To use it, include something like this into
akka.test.conf
and run your tests with system property
"akka.mode"
set to "test"
:
akka {
loggers = ["akka.testkit.TestEventListener"]
}
This is a specialised form of the TestActorRef with support for querying and setting the state of a FSM.
This is a specialised form of the TestActorRef with support for querying and setting the state of a FSM. Use a LoggingFSM with this class if you also need to inspect event traces.
val fsm = TestFSMRef(new Actor with LoggingFSM[Int, Null] {
override def logDepth = 12
startWith(1, null)
when(1) {
case Ev("hello") => goto(2)
}
when(2) {
case Ev("world") => goto(1)
}
}
assert (fsm.stateName == 1)
fsm ! "hallo"
assert (fsm.stateName == 2)
assert (fsm.underlyingActor.getLog == IndexedSeq(FSMLogEntry(1, null, "hallo")))
1.2
Test kit for testing actors.
Test kit for testing actors. Inheriting from this trait enables reception of
replies from actors, which are queued by an internal actor and can be
examined using the expectMsg...
methods. Assertions and bounds concerning
timing are available in the form of within
blocks.
class Test extends TestKit(ActorSystem()) { try { val test = system.actorOf(Props[SomeActor] within (1 second) { test ! SomeWork expectMsg(Result1) // bounded to 1 second expectMsg(Result2) // bounded to the remainder of the 1 second } } finally { system.shutdown() } }
Beware of two points:
within
blocks); it is expected that the code is executed from a
constructor as shown above, which makes this a non-issue, otherwise take
care not to run tests within a single test class instance in parallel.It should be noted that for CI servers and the like all maximum Durations are scaled using their Duration.dilated method, which uses the TestKitExtension.Settings.TestTimeFactor settable via akka.conf entry "akka.test.timefactor".
1.1
Implementation trait behind the akka.testkit.TestKit class: you may use this if inheriting from a concrete class is not possible.
Implementation trait behind the akka.testkit.TestKit class: you may use this if inheriting from a concrete class is not possible.
Use of the trait is discouraged because of potential issues with binary backwards compatibility in the future, use at own risk.
This trait requires the concrete class mixing it in to provide an akka.actor.ActorSystem which is available before this traits’s constructor is run. The recommended way is this:
class MyTest extends TestKitBase { implicit lazy val system = ActorSystem() // may add arguments here ... }
TestKit-based probe which allows sending, reception and reply.
Filter which matches Warning events, if they satisfy the given criteria:
Filter which matches Warning events, if they satisfy the given criteria:
source
, if given, applies a filter on the event’s originmessage
applies a filter on the event’s message (either with String.startsWith or Regex.findFirstIn().isDefined)If you want to match all Warning events, the most efficient is to use Left("")
.
Facilities for selectively filtering out expected events from logging so that you can keep your test run’s console output clean and do not miss real error messages.
Facilities for selectively filtering out expected events from logging so that you can keep your test run’s console output clean and do not miss real error messages.
Also have a look at the akka.testkit package object’s filterEvents
and
filterException
methods.
The source filters do accept Class[_]
arguments, matching any
object which is an instance of the given class, e.g.
EventFilter.info(source = classOf[MyActor]) // will match Info events from any MyActor instance
The message object will be converted to a string before matching ("null"
if it is null
).
Utilities to get free socket address.
A collection of common actor patterns used in tests.
A cyclic barrier wrapper for use in testing.
A cyclic barrier wrapper for use in testing. It always uses a timeout when waiting and timeouts are specified as durations. Timeouts will always throw an exception. The default timeout is 5 seconds. Timeouts are multiplied by the testing time factor for Jenkins builds.
Implementation helpers of the EventFilter facilities: send Mute
to the TestEventFilter to install a filter, and UnMute
to
deinstall it.
Implementation helpers of the EventFilter facilities: send Mute
to the TestEventFilter to install a filter, and UnMute
to
deinstall it.
You should always prefer the filter methods in the package object
(see akka.testkit filterEvents
and filterException
) or on the
EventFilter implementations.
A count down latch wrapper for use in testing.
A count down latch wrapper for use in testing. It always uses a timeout when waiting and timeouts are specified as durations. There's a default timeout of 5 seconds and the default count is 1. Timeouts will always throw an exception (no need to wrap in assert in tests). Timeouts are multiplied by the testing time factor for Jenkins builds.